Oxidation behavior of Ni-TiO2 and effect of SDS on the coating
Publish Year: 1397
نوع سند: مقاله کنفرانسی
زبان: English
View: 375
This Paper With 6 Page And PDF and WORD Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICESIT01_217
تاریخ نمایه سازی: 6 بهمن 1397
Abstract:
Surface modification is very important in the component in industry due to fracture. Fatigue, torsion and bending will be initiated from a surface. Electroplating is one of the way which can modify the surface. In this study Ni-TiO2 coatings were prepared on an AISI 430 stainless steel substrate by electrocodeposition in Watt’s plating bath containing TiO2 particles. Resistance to oxidation of Ni-TiO2 was studied after 200h in 800 0C. Results show better oxidation behavior were achieved after 200h in 800 ◦C while the cyclic oxidation worsen in the presence of SDS. Composite coatings were investigated by scanning electron microscope (SEM) and X-ray systems.
Authors
Eisa Khoran
Department of Metallurgy, Bahinar University, Kerman, Iran
Mohsen Khojaste Nejad
Department of R&D , Hormozgan Steel Co., Hormozgan, Iran
Mohsen Abaei
Department of Metallurgy, Bahinar University, Kerman, Iran
Saman Vali Nejad
Department of Metallurgy, Bahinar University, Kerman, Iran