Mechano-chemical synthesis of NiAl-TiC nanostructure powder
Publish place: 03rd Conference on Nanostructures
Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,098
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_001
تاریخ نمایه سازی: 21 دی 1388
Abstract:
NiAl-TiC nanocomposite was successfully synthesized via a ballmilled mixture of Ni, Al, Ti and graphite
powders. The structural and morphological evolutions of the powders were studied by Xray diffraction (XRD) and
scanning electron microscopy, respectively. Results show that NiAlTiC composite was obtained after 6h ofmilling
The mean grain size of 6 and 10nm were attained for NiAl and TiC at the end of milling, respectively. An annealing of
h milled sample at 600 C led to the formation of Ni (Al,Ti,C) solid solution. NiAlTiC nanocomposite that was
formed in the 12 h milled sample is stable during an annealing at 600 C. The mean grain size of NiAl at the 12h milled
powder increased during annealing at 600C. Maximum micro hardness value of 8.7 GPa was acquired from the 12h
milled powder.
Keywords:
Authors
M Zakeri
Ceramic Department, Islamic Azad University
E Hassani
Biomaterial Department, Islamic Azad
M.R Rahimipour
Ceramic Department, Materials and Energy Research Center, Karaj
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :