Corrosion Resistance of Ceramic Articles Fabricated From -SiAlON Nanopowder
Publish place: 03rd Conference on Nanostructures
Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,276
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_109
تاریخ نمایه سازی: 21 دی 1388
Abstract:
SiAlON ceramics are a special class of corrosion resistance materials. This property in addition to high strength and good thermal shock resistance make it a good choice for chemical industries. SiAlONs also have high wear resistance, low thermal expansion and good oxidation resistance up to above 1000°C. Therefore chemical resistance of SiAlONs under oxidation condition should be considered. In this work, corrosion resistance of standard specimens prepared from self-made SiAlON nanopowder was investigated. In order to carry out the corresponding corrosion resistance tests, disc shaped samples were prepared using pressureless sintering technique and Y2O3, SiO2, Al2O3 as sintering aids. Various acids such as hydrochloric and sulphuric acids and alkalis such as sodium hydroxide were used. Corrosion resistance was estimated based on weight loss. Hardness of samples was also measured before and after chemical tests. The results showed that -SiAlON exhibited very good corrosion resistance against H2SO4, HNO3, HCl and H3PO4 media, also no significant change in hardness after chemical tests.
Keywords:
Authors
F Pashaei Soorbaghi
Polymer Engineering Group, Chemical Engineering Department, Tarbiat Modares University
Z Sharif,
Polymer Engineering Group, Chemical Engineering Department, Tarbiat Modares University
A.R Bahramian
Polymer Engineering Group, Chemical Engineering Department, Tarbiat Modares University
M Kokabi
Polymer Engineering Group, Chemical Engineering Department, Tarbiat Modares University
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :