Investigating the Effectiveness of a Composite Patch on Repairing Pipes Subjected to Circumferential Cracks under Combined Loadings

Publish Year: 1398
نوع سند: مقاله ژورنالی
زبان: English
View: 489

This Paper With 14 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJOGST-8-2_006

تاریخ نمایه سازی: 22 تیر 1398

Abstract:

The purpose of this study is to investigate bending moment and the axial load capacity of a pressurized pipe suffering from a through-wall circumferential crack repaired by a composite sleeve. The three-dimensional finite element method (FEM) was adopted to compute the results, and the failure assessment diagram (FAD) was employed to investigate the failure behavior of the repaired pipe. The findings revealed that, for the investigated range of applied loads and angles of the crack, the interaction of brittle and ductile failure modes is negligible. Additionally, the yield strength of the cracked pipe was considered as reference stress to achieve a conservative design. Two cases of the combined loading state consisting of internal pressure/bending moment and internal pressure/axial tensile force were investigated. Repairing the crack under combined loadings using carbon-epoxy composites was studied where the influences of various parameters, including internal pressure, crack angle, and the composite patch thickness on the capacity of the cracked pipe to withstand bending moment and axial load were included. The results indicated that the bending moment and axial load capacities of the cracked pipe depend on internal pressure, crack angle, and the composite patch thickness; nevertheless, the crack angle is the main parameter. A composite sleeve can increase both bending moment and axial load capacity of the cracked pipe, but bending moment can be increased further than axial load. Using the composite patch to repair the cracked pipe caused the bending moment capacity to improve from 14.28% to 120%. On the other hand, the composite patch raised the axial load capacity from 5.1% to 93.5%. Additionally, an increase in the composite patch thickness caused the axial load capacity to extend more than bending load capacity.

Authors

Gholamreza Rashed

Associate Professor, Department of Mechanical Engineering, Petroleum University of Technology, Abadan, Iran

Hadi Eskandari

Associate Professor, Department of Mechanical Engineering, Petroleum University of Technology, Abadan, Iran

Ardeshir Savari

M.S. Student, Department of Mechanical Engineering, Petroleum University of Technology, Abadan, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Achour, Aida, Abdulmohsen Albedah, Faycal Benyahia, Bel Abbes Bachir Bouiadjra, ...
  • Anderson, T. L., Fracture Mechanics, Fundamentals and Applications, CRC Press, ...
  • ANSYS, ANSYS Software and User Manual, ANSYS Inc., 2017. ...
  • Atluri, S. N., Structural Integrity and Durability, Tech Science Press, ...
  • Chakrabarti, S. K. and Frampton, R. E., Review of Riser ...
  • Chan, P., Tshai, K., Johnson, M., and Li, S., Finite ...
  • Chen, J., and Pan, H., Stress Intensity Factor of Semi-elliptical ...
  • Duell, J., Wilson, J., and Kessler, M., Analysis of a ...
  • Hasegawa, K., Li, Y., and Osakabe, K., Combined Torsion and ...
  • Kaddouri, K., Ouinas, D., and Bouiadjra, B. B., FE Analysis ...
  • Lee, J. S., Ju, J. B., Jang, J. I., Kim, ...
  • Meriem-Benziane, M., Abdul-Wahab, S. A., Merah, N., and Babaziane, B., ...
  • Meriem-Benziane, M., Abdul-Wahab, S. A., Zahloul, H., Babaziane, B., Hadj-Meliani, ...
  • Miki, C., Kobayashi, T., Oguchi, N., Uchida, T., Suganuma, A., ...
  • Mohd, M. H., Lee, B. J., Cui, Y., and Paik, ...
  • Olsø, E., Nyhus, B., Østby, E., Berg, E., Holthe, K., ...
  • Ouinas, D., Achour, B., Bouiadjra, B. B., and Taghezout, N., ...
  • Qian, X.,KI–T Estimation for Embedded Flaws in Pipes Part II: ...
  • Rose, L., Baker, A., and Jones, R., Bonded Repair of ...
  • Shim, D. J., Choi, J. B., and Kim, Y. J., ...
  • Shouman, A. and Taheri, F., An Investigation into the Behavior ...
  • Stanton, P., Overview of Deepwater Drilling and Production Risers, in: ...
  • Zhu, X. K. and Leis, B. N., Evaluation of Burst ...
  • نمایش کامل مراجع