Year: 1396
COI: JR_JEFM-1-1_005
Language: EnglishView: 281
This Paper With 6 Page And PDF Format Ready To Download
با استفاده از پرداخت اینترنتی بسیار سریع و ساده می توانید اصل این Paper را که دارای 6 صفحه است به صورت فایل PDF در اختیار داشته باشید.
آدرس ایمیل خود را در کادر زیر وارد نمایید:
Authors
Abstract:
Titanium alloys are widely applied to marine, biomaterials, chemical, petrochemical and automotive industries because of their unique property such as excellent creep resistance, corrosion resistance and relative higher specific strength ratio. However, they suffer from poor tribological properties such as low surface hardness and absolute values of tensile and shear strength which result in low wear resistance. On the other hand when Ti alloys are worn, they produce a dark-colored dust which is not environmental friendly. This project is aimed at producing hard and wear resistant particles in a matrix of Commercially Pure Titanium (CP-Ti) substrate by TIG (Tungsten Inert Gas) surface alloying. Different mixtures of Molybdenum and Titanium Carbide powders were applied to the surface in order to improve the hardness of surface layers. The microstructure of TIG alloyed layers were analyzed by OM, SEM and E-DAX. It was found that the hardness of the treated layers was more than three times higher than that of the CP-Ti substrate. Moreover, the wear resistance of this coatings were between 60 to150 times better than the base material.
Keywords:
Paper COI Code
This Paper COI Code is JR_JEFM-1-1_005. Also You can use the following address to link to this article. This link is permanent and is used as an article registration confirmation in the Civilica reference:https://civilica.com/doc/897125/
How to Cite to This Paper:
If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:Vahedi Nemani, A. and Ghaffari, M. and Rasekh Saleh, N. and Tazikeh, H.,1396,Improving the Tribological Behavior of Commercially Pure Titanium Using TIG Surface Alloying,https://civilica.com/doc/897125
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :- L. Jian, H. Wang, Surf. Coat, Technol., 2(2005), 305. ...
- P. Zhang, Z. Xu, G. Zhang and Z. He, Surf. ...
- X. Chen, G. Wu, R. Wang, W. Guo, J. Yang, ...
- X.-Y. Li, P.-Q. Wu, B. Tang and J.-P. Celis, Vacuum, ...
- X. Chen, G. Wu, R. Wang, W. Guo, J. Yang, ...
- A. Zhechevaa, W. Shaa, S. Malinovb and A. Longa, Surf. ...
- F. Gil, J. biomater. Appl., 1(2002), 31. ...
- Y. Tamura, A. Yokoyama, F. Watari, M. Uo and T. ...
- M. Benda, J. Vlcek, and J. Musil, Vacuum, 1(1995), 43. ...
- B. Tang, Pei-Qiang Wu, Xiu-Yan Li, Ai-Lan Fan, Z. Xua ...
- Y. Itoh, A. Itoh, H. Azuma, T. Hioki, Surf. Coat. ...
- F.A. Hajbagheri, S.K. Bozorg and A. Amadeh, J. Mater. Sci., ...
- S. Mridha, HS. Ong, LS. Poh and P. Cheang, J. ...
- S. Mridha, B. Ng, Surf. Eng., 3(1999), 210. ...
- M. Ghaffari, M.H. Sohi, A.A. Amadeh, A.V. Nemani, Adv. Mater. ...
- A.V. Nemani, M.H. Sohi, A.A. Amadeh, M. Ghaffari, Adv. Mater. ...
- A.V. Nemani, M.H. Sohi, A.A. Amadeh, M. Ghaffari, Mater. Chem. ...
- S. Zhang, W.T. Wu, M.C. Wang and H.C. Man, Surf. ...
- E. Yun, K. Lee, and S. Lee, Surf. Coat. Technol., ...
- R.L. Sun, D.Z. Yang, L.X. Guo and S.L. Dong, Surf. ...
Research Info Management
اطلاعات استنادی این Paper را به نرم افزارهای مدیریت اطلاعات علمی و استنادی ارسال نمایید و در تحقیقات خود از آن استفاده نمایید.
Share this page
More information about COI
COI stands for "CIVILICA Object Identifier". COI is the unique code assigned to articles of Iranian conferences and journals when indexing on the CIVILICA citation database.
The COI is the national code of documents indexed in CIVILICA and is a unique and permanent code. it can always be cited and tracked and assumed as registration confirmation ID.