The Effects of Cyclic Extrusion Compression (CEC) Process Variables on Deformation Behavior of Al5052 Alloy
Publish place: 5th Iran International Aluminium Conference 2018 (IIAC2018)
Publish Year: 1397
نوع سند: مقاله کنفرانسی
زبان: English
View: 413
نسخه کامل این Paper ارائه نشده است و در دسترس نمی باشد
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC05_019
تاریخ نمایه سازی: 27 تیر 1398
Abstract:
Cyclic extrusion compression, (CEC) is one of the newest SPD (severe plastic deformation) methods, which produces nano-materials and ultra-fine grained materials with unusual features and properties. Study about the role of different variables of this process brings the possibility to optimize inputs to reduce the cost and time and to access better results in processed material. Strain rate, deformation ratio, temperature and friction are some of these important input variables that could be controlled by manufacturer. In the current research, CEC was simulated and the effects of different variables of this process on deformation behavior of Al5052 alloy, processed by CEC, were studied. It was concluded that the deformation ratio during CEC has the most significant effect on strain and stress distribution
Keywords:
Authors
Amir Hossein Ghasemi
Faculty of Engineering, University of Kashan, Kashan, Iran
Mahmoud Abbasi
Faculty of Engineering, University of Kashan, Kashan, Iran
Mohammad Givi
Faculty of Engineering, University of Kashan, Kashan, Iran