Publisher of Iranian Journals and Conference Proceedings

Please waite ..
CIVILICAWe Respect the Science
Publisher of Iranian Journals and Conference Proceedings

Fabricating of Aluminum 7075 based hybrid composite using ceramic particles

تعداد صفحات: 1 | تعداد نمایش خلاصه: 109 | نظرات: 0
سال انتشار: 1397
کد COI Paper: IIAC05_067
زبان Paper: Englishglish
نسخه کامل Paper در کنفرانس ارائه نشده است و در دسترس نیست.

مشخصات نویسندگان Paper Fabricating of Aluminum 7075 based hybrid composite using ceramic particles

Keyhan osseinnezhad - M.Sc Materials engineering of Sahand University, Tabriz, Iran
Mehdi Soltanalinezhad - Phd student of Amirkabir University, Tehran, Iran
Sadegh Ghazvinian - M.Sc Materials engineering of Iran University of Science & Technology, Tehran, Iran
Majid Hosseinzadeh - M.Sc Materials engineering of Shahid Bahonar University, Tehran, Iran

چکیده Paper:

Strengthening the components and decreasing its weight is already the aim of many researchers in different area such as aerospace and transportation industries. The aim of this work is to process the Al 7075 based hybrid composite using SiC and B4C reinforcement particles and studying the microstructure and mechanical properties. For this purpose hot press (HP) and accumulative roll bonding (ARB) was used. In this case after processing four strip with same dimensions and surface treatment, 0.8 vol.% of mentioned reinforced particles (0.4 vol.% SiC and 0.4 vol.%) were uniformly dispersed between four strips. Then afterward single press HP and two pass ARB have been carried out in 370°C and 320°C respectively. The microstructure and mechanical properties of processed samples is evaluated by OM, SEM, XRD, Tensile test and Microhardness. The microstructural results after single HP and two pass ARB interface bonding was improved. The mechanical results show processed sample was 1.5 times strengthen than as-received material

کلیدواژه ها:

Mechanical properties, Al 7075, microstructure, Accumulative roll bonding, Hybrid composite.

کد Paper/لینک ثابت به این Paper

برای لینک دهی به این Paper می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است و به عنوان سند ثبت Paper در مرجع سیویلیکا مورد استفاده قرار میگیرد:

کد COI Paper: IIAC05_067

نحوه استناد به Paper:

در صورتی که می خواهید در اثر پژوهشی خود به این Paper ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
undefined, undefined و undefined, undefined و undefined, undefined و undefined, undefined,1397,Fabricating of Aluminum 7075 based hybrid composite using ceramic particles,پنجمین کنفرانس بین المللی آلومینیوم ایران,Tehran,,,

در داخل متن نیز هر جا که به عبارت و یا دستاوردی از این Paper اشاره شود پس از ذکر مطلب، در داخل پارانتز، مشخصات زیر نوشته می شود.
برای بار اول: (1397, osseinnezhad, Keyhan؛ Mehdi Soltanalinezhad و Sadegh Ghazvinian و Majid Hosseinzadeh)
برای بار دوم به بعد: (1397, osseinnezhad؛ Soltanalinezhad و Ghazvinian و Hosseinzadeh)
برای آشنایی کامل با نحوه مرجع نویسی لطفا بخش راهنمای سیویلیکا (مرجع دهی) را ملاحظه نمایید.

Research Info Management

Certificate | Report Paper

Export Citation info of this Paper to research management softwares

New RelatedPapers

Share this paper


COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.