Evaluating the Effect of Dental Filling Material and Filling Depth on the Strength and Deformation of Filled Teeth
Publish place: Journal of Dental Materials and Techniques، Vol: 5، Issue: 4
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 821
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JDMT-5-4_002
تاریخ نمایه سازی: 20 مهر 1398
Abstract:
ackground and aim: It is important to evaluate the effect of the type of filling material on deformation and strength of tooth after filling and also the effect of filling depth on quality of restoration of a decayed tooth. Material and Methods: The Orthopantomogram (OPG) of the first and second molars of a 28-year-old man was made and the teeth were 3D modeled. The stress-deformation analysis was then performed on the models in the three states of normal tooth, tooth filled with amalgam and tooth filled with composite using finite element method under a distributed load of 400N equivalent to chewing force. Two values (1/2 and 1/3 of the tooth height) were considered for filling depth in the analyses. Results: The results showed that the normal first molar was exposed to a 7.2% greater risk of dental injuries compared to the normal second molar and also a greater stress is created in it when it is filled with composite. The first molar filled with a composite material is 13.7% weaker than the normal tooth while it is almost as strong as a normal tooth when it is filled with amalgam. The effect of the type of filling material on the strength and deformation of the second molar was trivial. Conclusion: Amalgam is a more proper dental filling material for the first molar although a 16.7% change in drilling depth is needed for tooth preparation. Dental filling material and filling depth have a small effect on the strength and deformation of filled second molars.
Keywords:
Authors
Seifollah Gholampour
Assistant professor of Biomechanical Engineering, Department of Biomedical Engineering, Tehran North Branch, Islamic Azad University, Tehran, Iran.
Ghazale Zoorazma
Student of Biomechanical Engineering. Department of Biomedical Engineering, Tehran North Branch, Islamic Azad University, Tehran, Iran.
Ehsan Shakouri
Assistant professor of Mechanical Engineering, Department of Biomedical Engineering, Tehran North Branch, Islamic Azad University, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :