Effect of Zirconia Thickness on the Tensile Stress of Zirconia Based All-Ceramic Restorations

Publish Year: 1394
نوع سند: مقاله ژورنالی
زبان: English
View: 307

This Paper With 6 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JDMT-4-3_004

تاریخ نمایه سازی: 20 مهر 1398

Abstract:

Introduction: The purpose of the presented study was to evaluate the effect of zirconia thickness on the tensile stress of zirconia based all-ceramic restorations. Methods: Twenty zirconia disks with 10mm diameter were prepared in two groups using CAD/CAM system. The thickness of zirconia was 0.5mm in first group and 0.3mm in second group. After sintering, 0.4mm glass ceramic porcelain was applied to each disk. Then, sintering and glazing of porcelain carried out. Instron testing machine with 1mm/min crosshead speed used to evaluate the failure load of the samples. Biaxial Flexural strength standard formula employed to calculate tensile stress of specimens. Statistical analysis performed using SPSS software. Results: Although data analysis showed more maximum tensile stress in 1st group, no significant differences were found between two groups. Conclusion: Zirconia with 0.5mm and 0.3mm thicknesses cause similar tensile stress in all-ceramic restorations and thickness of these laminates could be reduced to 0.7mm.

Authors

Masood Shiezadeh

Assistant Professor, Dental Materials Research Center, Department of Prosthodontics, Faculty of Dentistry, Mashhad University of Medical Science

Mahdie Seyf

Associate Professor, Mashhad Dental Research Center, Department of Prosthodontics, Faculty of Dentistry, Mashhad University of Medical Science

Hamid Reza Rajati

Assistant Professor, Dental Materials Research Center, Department of Prosthodontics, Faculty of Dentistry, Mashhad University of Medical Science

Asadolah Karazhian

Department of Prosthodontics, Faculty of Dentistry, Mashhad University of Medical Science

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial ...
  • Lawn BR, Deng Y, Thompson VP. Use of contact testing ...
  • Manicone PF, Iommetti PR, Raffaelli L. An overview of zirconia ...
  • Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials ...
  • Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture ...
  • Kim JH, Park JH, Park YB, Moon HS. Fracture load ...
  • Lüthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, ...
  • Altamimi AM, Tripodakis A, Eliades G, Hirayama H. Comparison of ...
  • Alghazzawi TF, Lemons J, Liu P-R, Essig ME, Janowski GM. ...
  • Touati B, Miara P, Nathanson D. Esthetic dentistry and ceramic ...
  • Kelly J, Tesk J, Sorensen J. Failure of all-ceramic fixed ...
  • Wakabayashi N, Anusavice K. Crack initiation modes in bilayered alumina/porcelain ...
  • Sobrinho LC, Consani S, Knowles J. Effect of convergence angle ...
  • McLean JW, Kedge MI. High-strength ceramics. Quintessence Int. 1987;18(2):97-106. ...
  • Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. ...
  • Hannink RH, Kelly PM, Muddle BC. Transformation toughening in zirconia‐containing ...
  • Sun T, Zhou S, Lai R, Liu R, Ma S, ...
  • Castelnuovo J, Tjan AH, Phillips K, Nicholls JI, Kois JC, ...
  • Stappert CF, Ozden U, Gerds T, Strub JR. Longevity and ...
  • Khatib D, Katamish H, Ibrahim AS. Fracture load of two ...
  • Schmidt KK, Chiayabutr Y, Phillips KM, Kois JC. Influence of ...
  • نمایش کامل مراجع