Simulation of Generalized Newtonian Fluid Flow in Micropore with Dead End
Publish place: 18th Annual Conference of Mechanical Engineering
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,922
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME18_003
تاریخ نمایه سازی: 1 تیر 1389
Abstract:
The flow characteristics of power-law generalized Newtonian fluid types in porous pores in reservoir with the dead ends are simulated numerically to find effects of fluids and flow character on replacement ability of flooding fluid with trapped oil in the dead ends. The contours of velocity and stream function are drawn and micro-scale sweep efficiency is calculated qualitatively. The power law model has been used to describe the rheological properties of polymer solutions. This model considers viscosity shear dependent behavior of fluids which can dramatically affects flow behavior of polymer solutions in reservoirs. A finite-volume-based numerical approach has been used to solve the equations of motion for the steady, isothermal and incompressible power-law fluid past through a two-dimensional micropore. The streamline plots showing the nature offluid on flow dynamic are presented. The computed result over the range of the power-law index range of 0.1 ≤ n ≤ 2 (covering both shear-thinning and shearthickening behavior) are shown. Numerical results show the power law index of polymer solutions is the main factor influencing sweepefficiency. With increasing power law index, the flowing area in the dead end of pores becomes bigger. The sweep area and displacement efficiency increase as the power law index increases. The shear-thickening nature of the displacing polymer fluids in general can improve the displacement efficiency in pores compared to shear-thinning and Newtonian fluids. This conclusion could be employed in selecting polymer fluids and designing polymer flooding operations.
Keywords:
Authors
Ata Kamyabi
School of Chemical and Petroleum Engineering, Sharif University of Technology
Ahmad Ramazani S.A.
School of Chemical and Petroleum Engineering, Sharif University of Technology
Charles Dubois
Department of Chemical Engineering, Ecole Polytechnique University
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :