Numerical Approach to Prediction of Forming Limit in Hydroforming of X-Joints
Publish place: 18th Annual Conference of Mechanical Engineering
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,246
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME18_137
تاریخ نمایه سازی: 1 تیر 1389
Abstract:
In this paper, to predict the hydroforming limit for Xjoints,two different criteria for ductile fracture are introduced into the finite element simulation and their alues are calculated from the histories of stress and strain in each element. The initiation of fracture is predicted by means of these two fracture criteria. The obtained results are checked with those in the literatures using forming limit curve (FLC) method and experimental data. Very good agreements exist between our results and the reported experimental data. However, it seems that the predicted results for the onset of strain localization and bursting failure using FLC method gives a considerable underestimation of hydroforming limit for X-joints. Hence, it is believedthat the present approach using the ductile fracture criteria give better prediction and could be used in hydroforming process planning specifically in X-joints
Keywords:
Hydroforming - X-joint - Forming limit -Ductile fracture criterion - FEM
Authors
M. H. Kargarnovin
Professor, Corresponding author
Y. Ashouri
Graduate student,
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :