Preparation and investigation of electromagnetic wave absorption of hybrid nanocomposites of Ba.5Sr.56Fe2O3/MWCNT/PANI
Publish place: 21th Iranian Inorganic Chemistry Conference
Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 257
نسخه کامل این Paper ارائه نشده است و در دسترس نمی باشد
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IICC21_097
تاریخ نمایه سازی: 5 آذر 1398
Abstract:
In this study, the wave absorption properties of ferrite based nanocomposite were investigated by using strontium and barium. This nanoparticle has been prepared by variety of methods and different commercial surfactants previously, in the present work the nanocomposite can be conveniently prepared by inexpensive materials. To enhance the absorption of magnetic waves, carbon nanotubes and polyaniline in the presence of magnetic nanoparticles were used [1-2]. After the Barium strontium ferrite nanoparticle were prepared by sol-gel method, radar absorption properties were enhanced by activated carbon nanotubes and polyaniline. The characteristics of the nanocomposites were investigated by FESEM, XRD, VSM and FTIR analysis and microwave absorption at 8-18 GHz. The best absorbance was observed in -45 dB at the X-band range for Ba.5Sr.56Fe2O3/MWCNT/PANI sample (4% polyaniline – 96% a mixture of barium ferrite and strontium ferrite) while the weight ratio of the powder was 50% with 5 mm thickness. In the X-band range the absorbance increased from -5.8 dB to -20 dB for Ba.5Sr.56Fe2O3/MWCNT/PANI sample by in-situ method (a mixture of barium ferrite/ nanotube and strontium ferrite / nanotube) with an increase in thickness from 1.8 to 6 mm.
Authors
Abbas Sharifi
Department of Chemistry, Faculty of Basic Sciences, Imam Hossein University, Tehran Iran
Seyed Lotfollah Sharifi Ale Hashem
Department of Chemistry, Faculty of Basic Sciences, Imam Hossein University, Tehran Iran
Seyed Salman Seyed Afghahi
Center of Advanced Materials, Faculty of Engineering, Imam Hossein University, Tehran, Iran
Mojtaba Jafarian
Department of Mechanical, Faculty of Engineering, Islamic Azad University North Tehran Branch, Tehran, Iran