Static Coil Design Considerations for the Magnetic Resonance Imaging

One of the main challenges in developing magnetic resonance imaging (MRI) systems is to create a static coil that needs to generate magnetic field density along with the characteristics of optimal homogeneity and magnitude size. To do this, two N42 Block PMs are used and the iron core is designed and optimized in accordance with the dimensions of PM pieces using ANSYS Maxwell software. Then, all iron parts are lathed, the yoke pieces and pole spacers are welded. In addition, PM and pole pieces are installed. Finally, measurement is done by Lutron to evaluate the static coil performance.

Keywords:

Magnetic resonance imaging , Permanent Magnet , Static Coil , Inhomogeneity

Authors

M. Shiravi

Department of Electrical & Computer Engineering, University of Kashan, Kashan, Iran

B. Ganji

Department of Electrical & Computer Engineering, University of Kashan, Kashan, Iran

A. Shiravi

Department of Radiology, Faculty of Medicine, Tehran University of Medical Sciences, Tehran, Iran

Certificate
من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

https://civilica.com/doc/962859

شناسه ملی سند علمی:

JR_IJE-32-3_006

تاریخ نمایه سازی: 10 آذر 1398

How to Cite to This Paper:

If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:

Shiravi, M. and Ganji, B. and Shiravi, A.,1397,Static Coil Design Considerations for the Magnetic Resonance Imaging,https://civilica.com/doc/962859

Scientometrics

The specifications of the publisher center of this Paper are as follows:

Ranking of University of Kashan

Type of center: دانشگاه دولتی

Paper count: 9,041

In the scientometrics section of CIVILICA, you can see the scientific ranking of the Iranian academic and research centers based on the statistics of indexed articles.