Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
عنوان مقاله: Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
شناسه ملی مقاله: JR_IJE-31-6_011
منتشر شده در شماره 6 دوره 31 فصل در سال 1397
شناسه ملی مقاله: JR_IJE-31-6_011
منتشر شده در شماره 6 دوره 31 فصل در سال 1397
مشخصات نویسندگان مقاله:
chandrashekar mahadevaiah - Dept of Industrial & Production Engg, Sri Jayachamarajendra College of Engineering, Myso
Sreenivasa Prasad - Dept of Industrial & Production Engg, Sri Jayachamarajendra College of Engineering, Myso
خلاصه مقاله:
chandrashekar mahadevaiah - Dept of Industrial & Production Engg, Sri Jayachamarajendra College of Engineering, Myso
Sreenivasa Prasad - Dept of Industrial & Production Engg, Sri Jayachamarajendra College of Engineering, Myso
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along with cobalt binder in cutting tool material for turning of titanium alloy. The iron-rich binder carbide tool samples were produced through powder metallurgy route using a powders with mean particle size of less than 0.5µm. Turning experiments were conducted at different speeds to evaluate the effects of iron-rich binder on tool flank wear. Results of turning experiments clearly showed that iron-rich binder tend to increase tool life in comparison to conventional WC-Co composite cutting tools.
کلمات کلیدی: Titanium, Cutting Tools, Tungsten Carbide, Cobalt, Iron
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/963158/