Optimization of magnetic components used in storing radar information
Publish place: The 5th International Conference on Science & Technology with Sustainable development approach
Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 349
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
TECHSD05_019
تاریخ نمایه سازی: 25 آذر 1398
Abstract:
Mechanical alloying of the FeCo equiatomic-magnetic alloy from elemental powders has been studied. The as-milled powders were characterized using scanning electron microscopy (SEM), x-ray diffraction (XRD) and vibrating sample magnetometry (VSM). ?Fe1−x??Cox?(X = 0.2, 0.25, 0.3, 0.35, 0.4 ,0.45 and 0.5) powders were prepared by mechanical alloying after 15,20,25 and 30 hours. magnetic properties were investigated based on microstructure.The saturation magnetization of the mixtures of Fe and Co increases with milling time, indicating an increasing homogeneity in composition and the phase formation. It is found that the saturation magnetization is also dependent on the Co content, which reaches the highest value of 266 emu/g at Fe60Co40.
Keywords:
Authors
m shahriari
Phd student in malekashtar university
a ghasemi
supervisor ,malekashtar in shahinshahr Esfahan university
m tavusi
advisor, shahinshahr Esfahan university
t sodaee
advisor, phd student in malekashtar university