Numerical And Experimental Investigation Of Deformation In Laser Forming Process
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,933
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME11_089
تاریخ نمایه سازی: 3 مرداد 1389
Abstract:
The laser forming process is an advanced process in sheet metal forming in which laser heat source is used to shape the metal sheet. In this paper, temperature distribution in sheet metals is investigated numerically and experimentally. Laser heat source is applied through curve paths in square sheet metal parts. Finite element simulation is performed with ABAQUS/CAE standard software package. Material property of AISI 1010 is used in FE model and experiments. The aim of this study is to identify the response related to deformation and characterize the effects of process parameters respect to the bending angle for a square sheet part. An experimental setup including a Nd:YAG laser, Model IQL-10, with maximum mean laser power of 500 W is used for the experiments to verify FEA results. It is observed that numerical results relatively are in agreement with the experimental results. Result show that the increasing laser power influenced the deformed shape.
Keywords:
Authors
M. Hoseinpour Gollo
Asistant Professor, Dept. of Mechanical Eng., Faculty of Engineering, Mohaghegh Ardabili
S.M. Mahdavian
senior lecturer, School of Aerospace, Mechanical & Manufacturing, RMIT University, Bundoora
H. moslemi naeini
Professor, Department of Mechanical Engineering, Tarbiat Modares University, Tehran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :