Removal of Acid Orange 7 dye from wastewater using combination of ultraviolet radiation, ultrasonic method, andMgO nanoparticles

Background: Industrial dyes are toxic and carcinogenic, therefore, they should be removed fromwastewater. The aim of this study was to investigate the removal of acid orange 7 Dye from wastewaterusing ultraviolet (UV) radiation, MgO nanoparticles, ultrasonic method alone and in combination witheach other.Methods: The effects of some factors such as temperature, pH, hydraulic retention time (HRT), UVpower, and concentration of MgO nanoparticles on the removal of Acid Orange 7 dye from syntheticwastewater using different methods were investigated. Also, adsorption isotherms for MgO nanoparticlesand kinetics for UV radiation were investigated.Results: The optimum HRT was 55 minutes while the temperature was not effective in dye removalusing the ultrasonic method. Under optimum conditions for UV irradiation method (HRT = 70minutes, UV power = 170 mW/cm2, and temperature = 10˚C), 58% of the dye was removed. However,under optimum conditions for MgO nanoparticles method (HRT = 15 minutes, temperature = 20˚C,and ratio of MgO nanoparticles to the initial dye concentration = 67.2), 82% of the dye was removed.By combining these methods, the dye removal efficiency was significantly increased. The combinationof ultrasonic method and MgO nanoparticles had no significant effect on increasing the dye removalefficiency from wastewater. It was revealed that dye removal using UV radiation can be described bythe first-order kinetics.Conclusion: According to the results, UV radiation has a synergistic effect on the dye adsorptionprocess by MgO nanoparticles. Therefore, the combination of these methods can be effective for theremoval of dye from wastewater.

Keywords:

Azo compounds , Ultraviolet rays , Ultrasonic method , Nanoparticles , Waste water , Kinetics