Crack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading
Publish place: Journal of Solid Mechanics، Vol: 10، Issue: 3
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 295
This Paper With 18 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-10-3_012
تاریخ نمایه سازی: 12 اسفند 1398
Abstract:
In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a massless rotational spring the compliance of which is related to the crack depth. Using these two models the pull-in voltage is extracted in the static and dynamic cases. Stability analysis is also accomplished. It has been observed that the pull-in voltage decreases as the crack depth increases and also when the crack approaches the clamped support of the beam. The finding of this research can further be used as a non-destructive test procedure for detecting cracks in micro-beams.
Keywords:
Authors
A.R Shahani
Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
G Rezazadeh
Mechanical Engineering Departments, Urmia University, Urmia, Iran
A Rahmani
Department of Applied Mechanics, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :