Bending Analysis of Composite Sandwich Plates with Laminated Face Sheets: New Finite Element Formulation
Publish place: Journal of Solid Mechanics، Vol: 8، Issue: 2
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 308
This Paper With 20 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-8-2_004
تاریخ نمایه سازی: 12 اسفند 1398
Abstract:
The bending behavior of composites sandwich plates with multi-layered laminated face sheets has been investigated, using a new four-nodded rectangular finite element formulation based on a layer-wise theory. Both, first order and higher-order shear deformation; theories are used in order to model the face sheets and the core, respectively. Unlike any other layer-wise theory, the number of degrees of freedom in this present model is independent of the number of layers. The compatibility conditions as well as the displacement continuity at the interface ‘face sheets–core’ are satisfied. In the proposed model, the three translation components are common for the all sandwich layers, and are located at the mid-plane of the sandwich plate. The obtained results show that the developed model is able to give accurate transverse shear stresses directly from the constitutive equations. Moreover, a parametric study was also conducted to investigate the effect of certain characteristic parameters (core thickness to total thickness ratio, side-to-thickness ratio, boundary conditions, plate aspect ratio, core-to-face sheet anisotropy ratio, core shear modulus to the flexural modulus ratio and degree of orthotropy of the face sheet) on the transverse displacement variation. The numerical results obtained by our model are compared favorably with those obtained via analytical solution and numerical/experimental, results obtained by other models. The results obtained from this investigation will be useful for a more comprehensive understanding of the behavior of sandwich laminates.
Keywords:
Authors
M.O Belarbi
Laboratoire de Génie Energétique et Matériaux, LGEM. Université de Biskra, B.P. ۱۴۵, R.P. ۰۷۰۰۰
A Tati
Laboratoire de Génie Energétique et Matériaux, LGEM. Université de Biskra, B.P. ۱۴۵, R.P. ۰۷۰۰۰
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :