دکتر محمدصادق ولی پور
Professor, Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
معرفی
استان
سمنان
شهر
سمنان
سمتهای علمی و اجرایی محمدصادق ولی پور در مجلات و ژورنال‌های معتبر ایران
- مجله تحقیقات انتقال حرارت و توده (مدیر مسئول)
سمتهای علمی و اجرایی محمدصادق ولی پور در کنفرانس ها و نشستهای معتبر ایران
- دانشگاه سمنان (عضو هیات علمی)
- بیست و ششمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران (دبیر علمی)
- بیستمین کنفرانس دینامیک شاره ها (دبیر اجرایی)
مقالات بین المللی محمدصادق ولی پور
"Experimental study of simultaneous effects of porous medium and biodiesel application on spray and combustion characteristics of gasoline–biodiesel blends", Springer Science and Business Media LLC, (2024), Vol 149, No 14: 7565-7578
"Performance Enhancement Techniques in Humidification–Dehumidification Desalination Systems: A Detailed Review", Springer Science and Business Media LLC, (2024), Vol , No :
"A review on solar methane reforming systems for hydrogen production", Elsevier BV, (2024), Vol , No :
"Preconcentration of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) in Clinical Samples by Various Hollow Fiber–Liquid Phase Microextraction (HF-LPME) Configurations With High-Performance Liquid Chromatography (HPLC) Detection", Informa UK Limited, (2024), Vol , No : 1-19
"Impact of double-axis tracking on thermal performance of the linear Fresnel Collector: An experimental study", Elsevier BV, (2024), Vol 272, No : 112483
"Experimental investigation of a novel design of cavity receiver for a parabolic dish collector humidification-dehumidification desalination system", Elsevier BV, (2024), Vol 299, No : 117845
"Effects of hybrid nanofluids and turbulator on efficiency improvement of parabolic trough solar collectors", Elsevier BV, (2023), Vol 148, No : 114-125
"Performance analysis of a parabolic trough collector using partial metal foam inside an absorber tube: an experimental study", Springer Science and Business Media LLC, (2023), Vol 30, No 38: 89794-89804
"Performance improvement of air-based solar photovoltaic/thermal collectors using wavy channels", Elsevier BV, (2023), Vol 211, No : 831-845
"Nanofluids in Solar Thermal Parabolic Trough Collectors (PTC s)", Wiley, (2023), Vol , No : 191-237
"Experimental study of optimized beginner-level wingsuit", Springer Science and Business Media LLC, (2023), Vol 93, No 6: 2253-2272
"Developing Innovations in Parabolic Trough Collectors (PTC s) Based on Numerical Studies", Wiley, (2023), Vol , No : 145-189
"Challenges and opportunities of desalination with renewable energy resources in Middle East countries", Elsevier BV, (2023), Vol 184, No : 113543
"Aerodynamic and RSM Analysis of Wingsuit Stability", Academic World Research, (2023), Vol 16, No 12:
"Numerical investigation of a small scale sloped solar chimney power plant", Elsevier BV, (2022), Vol 183, No : 1-11
"Porous Medium Applications in Internal Combustion Engines: A Review", Springer Science and Business Media LLC, (2022), Vol 141, No 3: 799-824
"A review on solar-powered cooling systems coupled with parabolic dish collector and linear Fresnel reflector", Springer Science and Business Media LLC, (2022), Vol 29, No 28: 42616-42646
"Investigation on the Performance of a solar chimney-flare gas hybrid system", Elsevier BV, (2022), Vol 52, No : 102279
"Experimental studies on solar chimneys for natural ventilation in domestic applications: a comprehensive review", Springer Science and Business Media LLC, (2022), Vol 29, No 49: 73842-73855
"An experimental study on a cylindrical-conical cavity receiver for the parabolic dish collector", Springer Science and Business Media LLC, (2022), Vol 30, No 3: 6517-6529
"Numerical investigation of a sloped solar chimney power plant: a three-dimensional study", Informa UK Limited, (2022), Vol 210, No 5: 756-772
"Thermal behavior of a flat plate solar collector with simultaneous use of helically heat collecting tubes and phase change materials", Elsevier BV, (2021), Vol 46, No : 101279
"The thermo-hydraulic performance of a parabolic trough collector with helically corrugated tube", Elsevier BV, (2021), Vol 44, No : 101013
"Hydrodynamic analysis of the nanofluids flow in a microchannel with hydrophobic and superhydrophobic surfaces", Elsevier BV, (2021), Vol 124, No : 266-275
"An experimental investigation on the simultaneous effects of helically corrugated receiver and nanofluids in a parabolic trough collector", Elsevier BV, (2021), Vol 128, No : 261-275
"An entropy production analysis for electroosmotic flow and convective heat transfer: a numerical investigation", Springer Science and Business Media LLC, (2021), Vol 145, No 4: 1877-1889
"TRANSITION AND LAMINAR FLOWS IN A REALISTIC GEOMETRY OF HUMAN UPPER AIRWAY", World Scientific Pub Co Pte Ltd, (2021), Vol 22, No 01:
"Two-phase modeling of low-Reynolds turbulent heat convection of Al2O3-water nanofluid in a 2-D helically corrugated channel", Informa UK Limited, (2021), Vol 210, No 4: 634-654
"Experimental study on the heat transfer enhancement in helically corrugated tubes under the non-uniform heat flux", Springer Science and Business Media LLC, (2020), Vol 140, No 3: 1611-1623
"The utilization of conical strip inserts in a parabolic trough collector", Springer Science and Business Media LLC, (2020), Vol 140, No 3: 1625-1631
"Thermal performance analysis of a flat plate solar collector by utilizing helically corrugated risers: An experimental study", Elsevier BV, (2020), Vol 207, No : 235-246
"Thermal performance of cold panels with phase change materials in a refrigerated truck", Elsevier BV, (2020), Vol 120, No : 119-126
"Fabrication of Poly Vinyl Acetate (PVAc) Nanofibers Using DMAC Solvent: Effect of Molecular Weight, Optimization by Taguchi DoE", Walter de Gruyter GmbH, (2020), Vol 35, No 3: 257-267
"Experimental Investigation of Water Droplet Impact on the Electrospun Superhydrophobic Cylindrical Glass: Contact Time, Maximum Spreading Factor, and Splash Threshold", American Chemical Society (ACS), (2020), Vol 36, No 45: 13498-13508
"Energy and exergy analysis of a parabolic trough collector using helically corrugated absorber tube", Elsevier BV, (2020), Vol 155, No : 735-747
"Effects of wall hydrophobicity on the thermohydraulic performance of the microchannels with nanofluids", Elsevier BV, (2020), Vol 117, No : 104758
"A new design of induced-charge electrokinetic micromixer with corrugated walls and conductive plate installation", Elsevier BV, (2020), Vol 114, No : 104564
"Heat transfer intensification in microchannel by induced-charge electrokinetic phenomenon: a numerical study", Springer Science and Business Media LLC, (2020), Vol 145, No 4: 1849-1861
"Investigation of airflow at different activity conditions in a realistic model of human upper respiratory tract", Informa UK Limited, (2020), Vol 24, No 2: 173-187
"Evaluation of solar chimney power plant performance: The effect of artificial roughness of collector", Elsevier BV, (2019), Vol 188, No : 175-184
"Proposal and assessment of a novel hybrid system for water desalination using solar and geothermal energy sources", Elsevier BV, (2019), Vol 467, No : 229-244
"Performance enhancement analysis of The flat plate collectors: A comprehensive review", Elsevier BV, (2019), Vol 102, No : 186-204
"Numerical investigation of a thermosyphon MHD electrical power generator", Elsevier BV, (2019), Vol 187, No : 378-397
"Investigation on the electrospun PVDF/NP-ZnO nanofibers for application in environmental energy harvesting", Elsevier BV, (2019), Vol 8, No 2: 1608-1615
"Effects of multi walled carbon nanotubes shape and size on thermal conductivity and viscosity of nanofluids", Elsevier BV, (2019), Vol 93, No : 96-104
"Effects of magnetic field on the liquid gallium thermosyphon fluid flow; a numerical study", Emerald, (2019), Vol 30, No 2: 681-703
"Investigation on the effect of different coated absorber plates on the thermal efficiency of the flat-plate solar collector", Springer Science and Business Media LLC, (2019), Vol 140, No 3: 1597-1610
"Numerical investigation of turbulent heat transfer enhancement using combined propeller-type turbulator and nanofluid in a circular tube", Springer Science and Business Media LLC, (2019), Vol 140, No 3: 1029-1044
"A Review on the Modeling of Gaseous Reduction of Iron Oxide Pellets", Wiley, (2019), Vol 91, No 1:
"Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron", International Digital Organization for Scientific Information (IDOSI), (2018), Vol 31, No 8:
"Numerican analysis of an integrated desalination unit using humidification-dehumidification and subsurface condensation processes", Elsevier BV, (2018), Vol 433, No : 172-185
"Nanofluids and converging flow passages: A synergetic conjugate-heat-transfer enhancement of micro heat sinks", Elsevier BV, (2018), Vol 97, No : 72-77
"Investigation of thermo-fluid behavior of mixed convection heat transfer of different dimples-protrusions wall patterns to heat transfer enhancement", Springer Science and Business Media LLC, (2018), Vol 54, No 11: 3219-3229
"Heat transfer enhancement in parabolic trough collectors: A comprehensive review", Elsevier BV, (2018), Vol 92, No : 198-218
"Enhancement of solar still by reticular porous media: Experimental investigation with exergy and economic analysis", Elsevier BV, (2018), Vol 130, No : 1341-1348
"Effect of Source Solution Components on Quality of Electrospun PVDF Nanofibers for Nanogenerator Application", Sumy State University, (2018), Vol 10, No 1: 01003-1-01003-6
"Assessment of the numerical and experimental performance of screw tidal turbines", SAGE Publications, (2018), Vol 232, No 7: 912-925
"A review on the application, simulation, and experiment of the electrokinetic mixers", Elsevier BV, (2018), Vol 126, No : 108-122
"Numerical investigation of efficiency enhancement in a direct absorption parabolic trough collector occupied by a porous medium and saturated by a nanofluid", Wiley, (2018), Vol 38, No 2: 727-740
"Numerical study of the effects of surface roughness on the mixed convection heat transfer of a laminar flow inside a horizontal curved dimpled tube", Springer Science and Business Media LLC, (2018), Vol 55, No 7: 2009-2016
"Parametric analysis of domestic refrigerators using PCM heat exchanger", Elsevier BV, (2017), Vol 83, No : 1-13
"Heat Transfer Enhancement in a Stagnant Dielectric Liquid by the Up and Down Motion of Conductive Particles Induced by Coulomb Forces", Academic World Research, (2017), Vol 10, No 1: 169-182
"Heat and fluid flow through a helical annulus enhanced by a porous material: A perturbation study", Elsevier BV, (2017), Vol 112, No : 1566-1574
"Copper laminated composites reinforced with Al2O3 nanoparticles by suspension method and hot pressing", IOP Publishing, (2017), Vol 201, No : 012026
"CFD simulation of two-phase gas-particle flow in the Midrex shaft furnace: The effect of twin gas injection system on the performance of the reactor", Elsevier BV, (2017), Vol 42, No 1: 103-118
"Numerical investigation of heat and mass transfer flow under the influence of silicon carbide by means of plasma-enhanced chemical vapor deposition vertical reactor", Springer Science and Business Media LLC, (2017), Vol 30, No 12: 3721-3731
"Thermally developing flow inside a porous-filled channel in the presence of internal heat generation under local thermal non-equilibrium condition: A perturbation analysis", Elsevier BV, (2016), Vol 98, No : 827-834
"Stability of nanofluids: Molecular dynamic approach and experimental study", Elsevier BV, (2016), Vol 111, No : 1-14
"On the thermally developing forced convection through a porous material under the local thermal non-equilibrium condition: An analytical study", Elsevier BV, (2016), Vol 92, No : 815-823
"Modeling the Performance of Bi-Textured Micropillar Array as a Wicked Evaporator", American Society of Mechanical Engineers, (2016), Vol , No :
"Microchannels enhanced by porous materials: Heat transfer enhancement or pressure drop increment?", Elsevier BV, (2016), Vol 110, No : 22-32
"Mathematical modelling of wustite pellet reduction: grain model in comparison with USCM", SAGE Publications, (2016), Vol 43, No 6: 418-425
"Magnetohydrodynamic effects on flow structures and heat transfer over two cylinders wrapped with a porous layer in side", Emerald, (2016), Vol 26, No 5: 1416-1432
"Investigation of forced convection through entrance region of a porous-filled microchannel: An analytical study based on the scale analysis", Elsevier BV, (2016), Vol 99, No : 446-454
"Investigating the effects of nanoparticles mean diameter on laminar mixed convection of a nanofluid through an inclined tube with circumferentially nonuniform heat flux", Pleiades Publishing Ltd, (2016), Vol 25, No 4: 563-575
"Experimental investigation of subcooled flow boiling of water/TiO2 nanofluid in a horizontal tube", National Library of Serbia, (2016), Vol 20, No 1: 99-108
"Conjugate Heat Transfer Inside Microchannels Filled with Porous Media: An Exact Solution", American Institute of Aeronautics and Astronautics (AIAA), (2016), Vol 30, No 4: 814-824
"Analysis of a solar desalinator (humidification–dehumidification cycle) including a compound system consisting of a solar humidifier and subsurface condenser using DoE", Elsevier BV, (2016), Vol 397, No : 9-21
"Water evaporation phenomena on micro and nanostructured surfaces", Elsevier BV, (2015), Vol 90, No : 112-121
"Temperature-dependent conductivity in forced convection of heat exchangers filled with porous media: A perturbation solution", Elsevier BV, (2015), Vol 91, No : 259-266
"Reconstruction of Temperature Distribution in the Combustion Region of a Non-Gray Medium", Informa UK Limited, (2015), Vol 68, No 8: 908-924
"Optimization of a PV/T (photovoltaic/thermal) active solar still", Elsevier BV, (2015), Vol 87, No : 142-152
"Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube", National Library of Serbia, (2015), Vol 19, No 2: 619-630
"Experimental and numerical investigation of a shaped microchannel evaporator for a micro Rankine cycle application", Elsevier BV, (2015), Vol 96, No : 191-200
"Enhancing heat transfer in microchannel heat sinks using converging flow passages", Elsevier BV, (2015), Vol 92, No : 244-250
"Effects of Inclination Angle on Mixed Convection Heat Transfer of a Nanofluid in a Square Cavity", Informa UK Limited, (2015), Vol 16, No 1: 11-21
"EFFECTS OF BLOCKAGE RATIO AND PRANDTL NUMBER ON STEADY FLOW AND HEAT TRANSFER AROUND AN INCLINED SQUARE CYLINDER", Begell House, (2015), Vol 46, No 6: 541-562
"Convection–radiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis", Elsevier BV, (2015), Vol 74, No : 448-455
"Control of wake and vortex shedding behind a porous circular obstacle by exerting an external magnetic field", Elsevier BV, (2015), Vol 385, No : 198-206
"Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material", Springer Science and Business Media LLC, (2015), Vol 108, No 2: 413-436
"Analytical Study of Heat Flux Splitting in Micro-channels Filled with Porous Media", Springer Science and Business Media LLC, (2015), Vol 109, No 3: 571-587
"Perturbation Analysis of the Local Thermal Non-equilibrium Condition in a Fluid-Saturated Porous Medium Bounded by an Iso-thermal Channel", Springer Science and Business Media LLC, (2014), Vol 102, No 2: 139-152
"Optimization of Turbine Blade Cooling Using Combined Cooling Techniques", Informa UK Limited, (2014), Vol 8, No 3: 462-475
"Numerical study of flow around and through a porous diamond cylinder in different apex angles", Emerald, (2014), Vol 24, No 7: 1504-1518
"Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder", Springer Science and Business Media LLC, (2014), Vol 102, No 2: 207-225
"Numerical modeling of flow around and through a porous cylinder with diamond cross section", Elsevier BV, (2014), Vol 46, No : 74-81
"Numerical analysis of the curvature effects on Ranque–Hilsch vortex tube refrigerators", Elsevier BV, (2014), Vol 65, No 1-2: 176-183
"Numerical analysis for curved vortex tube optimization", Elsevier BV, (2014), Vol 50, No : 98-107
"Inverse Boundary Design Radiation Problem Within Combustion Enclosures with Absorbing-Emitting Non-Gray Media", Informa UK Limited, (2014), Vol 65, No 11: 1114-1137
"Cooling performance of a nanofluid flow in a heat sink microchannel with axial conduction effect", Springer Science and Business Media LLC, (2014), Vol 117, No 4: 1821-1833
"Application of Response Surface Methodology to optimization of a standard Ranque–Hilsch vortex tube refrigerator", Elsevier BV, (2014), Vol 67, No 1-2: 545-553
"Analytical study on post-buckling and nonlinear free vibration analysis of FG beams resting on nonlinear elastic foundation under thermo-mechanical loadings using VIM", Techno-Press, (2014), Vol 17, No 5: 753-776
"A numerical study on convection around a square cylinder using Al2O3-H2O nanofluid", National Library of Serbia, (2014), Vol 18, No 4: 1305-1314
"A novel silicon bi-textured micropillar array to provide fully evaporated steam for a micro-Rankine cycle application", IOP Publishing, (2014), Vol 47, No 47: 475301
"Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium", Springer Science and Business Media LLC, (2014), Vol 107, No 1: 171-186
"Effects of Inclination Angle on Laminar Mixed Convection of a Nanofluid Flowing through an Annulus", Informa UK Limited, (2014), Vol 202, No 12: 1693-1702
"Richardson Number Ratio Effect on Laminar Mixed Convection of a Nanofluid Flow in an Annulus", Informa UK Limited, (2013), Vol 14, No 4: 304-316
"NUMERICAL STUDY OF DEVELOPED LAMINAR MIXED CONVECTION OF Al2O3/WATER NANOFLUID IN AN ANNULUS", Informa UK Limited, (2013), Vol 200, No 7: 878-894
"Numerical investigation of subcooled flow boiling of a nanofluid", Elsevier BV, (2013), Vol 64, No : 232-239
"Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring", Elsevier BV, (2013), Vol 63, No : 91-100
"Analysis of SiC Deposition Rate in a Tubular Hot-Wall Reactor with Polymeric Source Using the DoE Method", Springer Science and Business Media LLC, (2013), Vol 42, No 6: 931-938
"A Modified Disjoining Pressure Model for Thin Film Evaporation of Water", American Society of Mechanical Engineers, (2013), Vol , No :
"Solar absorptivity of nano-porous anodic alumina (NPAA): effects of structural features", Springer Science and Business Media LLC, (2013), Vol 21, No 3: 331-336
"Effects of discrete source-sink arrangements on mixed convection in a square cavity filled by nanofluid", Springer Science and Business Media LLC, (2013), Vol 31, No 1: 12-19
"Numerical modeling of ground water flow and contaminant transport in a saturated porous medium", AIP, (2012), Vol , No : 111-114
"Numerical Investigation of Magnetic Effect on Forced Convection Around Two-Dimensional Circular Cylinder Embedded in Porous Media", Informa UK Limited, (2012), Vol 6, No 3: 395-402
"Effects of nanoparticles mean diameter on the particle migration and thermo-hydraulic behavior of laminar mixed convection of a nanofluid in an inclined tube", Springer Science and Business Media LLC, (2012), Vol 48, No 8: 1297-1308
"Computational modeling of adherent cell growth in a hollow-fiber membrane bioreactor for large-scale 3-D bone tissue engineering", Springer Science and Business Media LLC, (2012), Vol 15, No 3: 250-265
"Comparative assessment of single and two-phase models for numerical studies of nanofluid turbulent forced convection", Elsevier BV, (2012), Vol 37, No : 136-146
"Inverse Estimation of Temperature Profile in a Non-Gray Medium with Soot Particles Between Two Parallel Plates", Informa UK Limited, (2012), Vol 63, No 1: 31-54
"Experimental investigation and comparison of subcooled flow boiling of TiO2 nanofluid in a vertical and horizontal tube", SAGE Publications, (2012), Vol 227, No 8: 1742-1753
"Performance comparison of relations for nanofluids properties in the CFD prediction of mixed convection", Begell House, (2011), Vol 3, No 3: 237-360
"Numerical study of two phase laminar mixed convection nanofluid in elliptic ducts", Elsevier BV, (2011), Vol 31, No 14-15: 2348-2359
"Numerical investigation of fluid flow and heat transfer around a solid circular cylinder utilizing nanofluid", Elsevier BV, (2011), Vol 38, No 9: 1296-1304
"Experimental modeling of a curved Ranque–Hilsch vortex tube refrigerator", Elsevier BV, (2011), Vol 34, No 4: 1109-1116
"Effects of inclination angle on the steady flow and heat transfer of power-law fluids around a heated inclined square cylinder in a plane channel", Elsevier BV, (2011), Vol 166, No 23-24: 1406-1414
"Conjugate heat transfer of laminar mixed convection of a nanofluid through an inclined tube with circumferentially non-uniform heating", Springer Science and Business Media LLC, (2011), Vol 6, No 1:
"Conjugate heat transfer of laminar mixed convection of a nanofluid through a horizontal tube with circumferentially non-uniform heating", Elsevier BV, (2011), Vol 50, No 10: 1963-1972
"Comparative analysis of single and two-phase models for CFD studies of nanofluid heat transfer", Elsevier BV, (2011), Vol 50, No 8: 1343-1354
"Analysis of a solar desalination unit with humidification–dehumidification cycle using DoE method", Elsevier BV, (2011), Vol 278, No 1-3: 70-76
"Numerical Study of Laminar Mixed Convection of a Nanofluid in a Horizontal Curved Tube with Constant Heat Flux and Mass Flow Rate", Trans Tech Publications, Ltd., (2011), Vol 110-116, No : 3657-3662
"Effect of Nanoparticle Concentration on Thermo-Hydraulic Behavior of a Nanofluid in a Horizontal Tube with Constant Heat Flux and Mass Flow Rate", Trans Tech Publications, Ltd., (2011), Vol 110-116, No : 3650-3656
"Turbulent mixed convection of a nanofluid in a horizontal curved tube using a two-phase approach", Elsevier BV, (2010), Vol 37, No 10: 1551-1558
"Thermodynamic optimization of multi-effect desalination plant using the DoE method", Elsevier BV, (2010), Vol 257, No 1-3: 195-205
"Optimum geometry design of a longitudinal fin with volumetric heat generation under the influences of natural convection and radiation", Elsevier BV, (2010), Vol 51, No 10: 1938-1946
"Optimum design of a longitudinal fin array with convection and radiation heat transfer using a genetic algorithm", Elsevier BV, (2010), Vol 49, No 11: 2222-2229
"Numerical analysis of solar desalination using humidification—dehumidification cycle", Elsevier BV, (2010), Vol 19, No 1-3: 294-300
"Exergy efficiency of a solar photovoltaic array based on exergy destructions", SAGE Publications, (2010), Vol 224, No 6: 813-825
"Exergetic performance assessment of a solar photovoltaic thermal (PV/T) air collector", Elsevier BV, (2010), Vol 42, No 11: 2184-2199
"Comparison of Single and Two-Phase Models for the Study of Mixed Convection Flows With Nanofluids", ASMEDC, (2010), Vol , No : 607-616
"An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector", Elsevier BV, (2010), Vol 87, No 7: 2328-2339
"Numerical study of nanofluid mixed convection in a horizontal curved tube using two-phase approach", Springer Science and Business Media LLC, (2010), Vol 47, No 1: 107-118
"Exergetic optimization of a solar photovoltaic thermal (PV/T) air collector", Hindawi Limited, (2010), Vol 35, No 9: 813-827
"Numerical study of flow parameters and entropy generation on a centrifugal fan", Inderscience Publishers, (2009), Vol 6, No 1: 80
"Numerical study of developing laminar forced convection of a nanofluid in an annulus", Elsevier BV, (2009), Vol 48, No 11: 2119-2129
"Numerical modelling of non-isothermal reduction of porous wustite pellet with syngas", SAGE Publications, (2009), Vol 36, No 2: 91-96
"Modelling of non-catalytic gas–solid reactions – multicomponent non-equimolar counter diffusion of gaseous phase", SAGE Publications, (2009), Vol 118, No 2: 85-97
"Inverse radiation problem of temperature distribution in one-dimensional isotropically scattering participating slab with variable refractive index", Elsevier BV, (2009), Vol 110, No 8: 491-505
"A new model for calculating the effective viscosity of nanofluids", IOP Publishing, (2009), Vol 42, No 5: 055501
"Numerical study of laminar mixed convection of a nanofluid in a horizontal tube using two-phase mixture model", Elsevier BV, (2008), Vol 28, No 7: 717-727
"Fully developed mixed convection in horizontal and inclined tubes with uniform heat flux using nanofluid", Elsevier BV, (2008), Vol 29, No 2: 545-556
"Experimental study of onset of laminar–turbulent transition in mixed convection in a vertical heated tube", Elsevier BV, (2008), Vol 51, No 25-26: 5895-5905
"Effect of nanoparticles mean diameter on mixed convection heat transfer of a nanofluid in a horizontal tube", Elsevier BV, (2008), Vol 29, No 2: 557-566
"Prediction of turbulent forced convection of a nanofluid in a tube with uniform heat flux using a two phase approach", Elsevier BV, (2007), Vol 28, No 2: 211-219
"Numerical study of laminar mixed convection of a nanofluid in horizontal curved tubes", Elsevier BV, (2007), Vol 27, No 8-9: 1327-1337
"Numerical investigation of nonisothermal reduction of hematite using Syngas: the shaft scale study", IOP Publishing, (2007), Vol 15, No 5: 487-507
"Predicted effects of inlet turbulent intensity on mixed convection in vertical tubes with uniform wall heat flux", Elsevier BV, (2006), Vol 45, No 5: 433-442
"Mathematical modeling of the reaction in an iron ore pellet using a mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: an isothermal study", Elsevier BV, (2006), Vol 17, No 3: 277-295
"Aero-Acoustical Effects of Some Parameters of a Backward-Curved Centrifugal Fan Using DoE", Informa UK Limited, (2006), Vol 12, No 2: 353-365
"Modeling of multiple noncatalytic gas–solid reactions in a moving bed of porous pellets based on finite volume method", Springer Science and Business Media LLC, (2006), Vol 43, No 9: 881-894
"Sensitivity Analysis of Entrance Design Parameters of a Backward-Inclined Centrifugal Fan Using DOE Method and CFD Calculations", ASME International, (2005), Vol 128, No 3: 446-453
"Low Reynolds number mixed convection in vertical tubes with uniform wall heat flux", Elsevier BV, (2003), Vol 46, No 25: 4823-4833
"Experimental modeling of vortex tube refrigerator", Elsevier BV, (2003), Vol 23, No 15: 1971-1980
مقالات محمدصادق ولی پور در کنفرانس های داخلی
بررسی اثر واکنش گاز-آب بر احیای گندله ی وستیتی (FeO) به وسیله ی مخلوط گازهای هیدروژن، منو کسید کربن، بخار آب و دی اکسید کربن
سال 1389
ارائه شده در سمپوزیوم فولاد ۱۳۸۹
مدلسازی عددی پخش مواد آلاینده همراه جریان آب در یک محیط متخلخل
سال 1391
ارائه شده در اولین کنفرانس انتقال حرارت و جرم ایران
مدلسازی ریاضی احیا سنگ آهن در یک کوره بلند
سال 1391
ارائه شده در اولین کنفرانس انتقال حرارت و جرم ایران
امکانسنجی فنی و اقتصادی استفاده از سیستم تولید همزمان برق و حرارت با مولد موتور گازسوز در یک کارخانه مواد شوینده
سال 1393
ارائه شده در بیست و دومین کنفرانس سالانه بین المللی مهندسی مکانیک
HOW THE SIROLIMOUS-RELEASING DYNAMICS CHANGE WHEN ADVENTITIA LAYER AND DRUG METABOLISM ARE TAKEN INTO ACCOUNT
سال 1397
ارائه شده در بیست و ششمین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران
حل تحلیلی معادلات حاکم بر جریان سیال عامل در ناحیه بخار، لوله های گرمایی مسطح
سال 1393
ارائه شده در دومین کنفرانس انتقال حرارت و جرم ایران
بررسی فرایندی روش احیاء مستقیم تولید فولاد با تاکید بر انتشار کربن دی اکسید و مصرف انرژی
سال 1393
ارائه شده در دومین کنفرانس انتقال حرارت و جرم ایران
شبیه سازی عددی دینامیک رهایش دارو درون جداره عروق کرونری بررسی اثر پوشش دو لایه استنت های دارویی پلیمری
سال 1398
ارائه شده در بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
شبیه سازی عددی دینامیک رهایش دارو درون جداره عروق کرونری: بررسی اثر فشار خون
سال 1398
ارائه شده در بیست و چهارمین کنفرانس سالانه بین المللی انجمن مهندسان مکانیک ایران
مقالات محمدصادق ولی پور در ژورنال های داخلی
شبیه سازی عددی و بررسی تجربی یک لوله گردبادی در مقیاس میکرو
سال 1391
ارائه شده در فصلنامه مهندسی مکانیک و ارتعاشات