سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
سمتهای علمی و اجرایی در مجلات و ژورنالهای معتبر ایران
سمتهای علمی و اجرایی در کنفرانس ها و نشستهای معتبر ایران
- عضو کمیته علمی - هیات داوران The 19th International Conference on Traffic and Transportation Engineering(1401)
- دبیر علمی Ninth Conference on Air and Noise Pollution Management(1400)
- عضو شورای سیاست گذاری - راهبردی The first conference on recent developments and future trends in the automotive industry(1399)
- دبیر کنفرانس International Conference on Manufacturing Engineering(1398)
ISI Papers
- "Optimal Active Control of Vehicle Suspension System Including Time Delay and Preview for Rough Roads", SAGE Publications, (2002), Vol 8, No 7: 967-991
- "Study on automatic control of arc gap in robotic TIG welding", Springer Science and Business Media LLC, (2010), Vol 50, No 9-12: 953-960
- "Development of an inductive encoder for simultaneous measurement of two-dimensional displacement", Springer Science and Business Media LLC, (2010), Vol 53, No 5-8: 681-688
- "FABRICATION OF STM TUNGSTEN NANOTIP BY ELECTROCHEMICAL ETCHING METHOD", World Scientific Pub Co Pte Lt, (2009), Vol 08, No 03: 305-310
- "A novel lattice structure for SL investment casting patterns", Emerald, (2009), Vol 15, No 4: 255-263
- "Experimental investigation of parameters influencing electrostatic motor’s performance with air bearing operation", Springer Science and Business Media LLC, (2008), Vol 43, No 3-4: 211-216
- "A comprehensive study on capabilities and limitations of roller–screw with emphasis on slip tendency", Elsevier BV, (2009), Vol 44, No 10: 1887-1899
- "An approach to design and fabrication of resonant giant magnetostrictive transducer", Techno-Press, (2016), Vol 17, No 2: 313-325
- "Identification of a Three Phase Panel Type Electrostatic Actuator", IEEE, (2008), Vol , No :
- "Study on the Magnetic Hysteresis of Terfenol-D Using New Hybrid Model", Trans Tech Publications, Ltd., (2014), Vol 605, No : 519-522
- "Interdigitated electrode design and optimization for dielectrophoresis cell separation actuators", Elsevier BV, (2017), Vol 86, No : 41-49
- "Simulation and investigation of a particle positioning device performance by acoustophoretic phenomenon", IEEE, (2016), Vol , No :
- "Development of Gasoline Direct Injector Using Giant Magnetostrictive Materials", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 53, No 1: 521-529
- "Electrowetting based actuation of droplets with PDMS dielectric", IEEE, (2016), Vol , No :
- "Reduction of magneto rheological dampers stiffness by incorporating of an eddy current damper", Elsevier BV, (2017), Vol 396, No : 51-68
- "A new design of Electrostatic Traveling Wave (ETW) micropump and the effect of parameters on the flow rate", Elsevier BV, (2016), Vol 48, No : 8-14
- "Study on classical and excess eddy currents losses of Terfenol-D", Elsevier BV, (2015), Vol 388, No : 150-159
- "Stochastic optimal preview control of a vehicle suspension", Elsevier BV, (2004), Vol 275, No 3-5: 973-990
- "Influence of ultrasonic stress relief on stainless steel 316 specimens: A comparison with thermal stress relief", Elsevier BV, (2013), Vol 46, No : 713-723
- "Development of Magnetostrictive Resonant Torsional Vibrator", Institute of Electrical and Electronics Engineers (IEEE), (2015), Vol 51, No 9: 1-8
- "Analytical, numerical and experimental investigation of a giant magnetostrictive (GM) force sensor", Emerald, (2015), Vol 35, No 4: 357-365
- "A combined Preisach–Hyperbolic Tangent model for magnetic hysteresis of Terfenol-D", Elsevier BV, (2015), Vol 396, No : 38-47
- "Effect of magnetic field on mechanical properties in Permendur", Elsevier BV, (2016), Vol 651, No : 598-603
- "Electrostatic rotation of Plexiglas disc supported on air bearing", IEEE, (2007), Vol , No :
- "Designing and modelling of a modern artificial fluid wave generation system with flexible mechatronic control", IEEE, (2007), Vol , No :
- "A novel ultrasonic motor with roller interface (RUSM)", IEEE, (2009), Vol , No :
- "A new hybrid longitudinal–torsional magnetostrictive ultrasonic transducer", IOP Publishing, (2013), Vol 22, No 6: 065013
- "An approach to design and fabrication of a piezo-actuated microdroplet generator", Springer Science and Business Media LLC, (2013), Vol 70, No 5-8: 1091-1099
- "Development of a hybrid DEP-SAW device for trapping/sensing target cells", Elsevier BV, (2018), Vol 141, No : 355-361
- "Analysis of parameter effects on Electrostatic Induction Dielectric Sheet Conveyor performance", Springer Science and Business Media LLC, (2012), Vol 13, No 1: 65-70
- "Section 7: Other Actuators", IEEE, (2009), Vol , No :
- "Optimal Active Control of Vehicle Suspension System Including Time Delay and Preview for Rough Roads", SAGE Publications, (2002), Vol 8, No 7: 967-991
- "Stochastic optimal preview control of a vehicle suspension", Elsevier BV, (2004), Vol 275, No 3-5: 973-990
- "Electrostatic rotation of Plexiglas disc supported on air bearing", IEEE, (2007), Vol , No :
- "Designing and modelling of a modern artificial fluid wave generation system with flexible mechatronic control", IEEE, (2007), Vol , No :
- "Two dimensional inductive encoder for measuring 2D displacement", IEEE, (2008), Vol , No :
- "Identification of a Three Phase Panel Type Electrostatic Actuator", IEEE, (2008), Vol , No :
- "Statistical analysis of parameter effects on linear velocity of ferrous particles in an AC electric field as a new method for powder transportation", Springer Science and Business Media LLC, (2009), Vol 45, No 1-2: 140-147
- "Optimization of STM/FIM nanotip aspect ratio based on the Taguchi method", Springer Science and Business Media LLC, (2008), Vol 44, No 1-2: 80-90
- "FABRICATION OF STM TUNGSTEN NANOTIP BY ELECTROCHEMICAL ETCHING METHOD", World Scientific Pub Co Pte Lt, (2009), Vol 08, No 03: 305-310
- "Experimental investigation of parameters influencing electrostatic motor’s performance with air bearing operation", Springer Science and Business Media LLC, (2008), Vol 43, No 3-4: 211-216
- "Effect of fabrication process parameters on the apex-radius of STM tungsten nanotip", Wiley, (2009), Vol 31, No 2: 65-74
- "Analysis of the dynamic characteristics of a three phase panel type electrostatic actuator using PEM system identification method", Elsevier BV, (2009), Vol 151, No 2: 173-178
- "A novel ultrasonic motor with roller interface (RUSM)", IEEE, (2009), Vol , No :
- "A novel lattice structure for SL investment casting patterns", Emerald, (2009), Vol 15, No 4: 255-263
- "A comprehensive study on capabilities and limitations of roller–screw with emphasis on slip tendency", Elsevier BV, (2009), Vol 44, No 10: 1887-1899
- "Study on automatic control of arc gap in robotic TIG welding", Springer Science and Business Media LLC, (2010), Vol 50, No 9-12: 953-960
- "Introduction of roller interface ultrasonic motor (RIUSM)", Elsevier BV, (2010), Vol 163, No 1: 304-310
- "Development of an inductive encoder for simultaneous measurement of two-dimensional displacement", Springer Science and Business Media LLC, (2010), Vol 53, No 5-8: 681-688
- "Bioreactors for Stimulation of Cells In Vitro: A Review of Recent Patents", Bentham Science Publishers Ltd., (2012), Vol 5, No 2: 131-141
- "Analysis of parameter effects on Electrostatic Induction Dielectric Sheet Conveyor performance", Springer Science and Business Media LLC, (2012), Vol 13, No 1: 65-70
- "Influence of ultrasonic stress relief on stainless steel 316 specimens: A comparison with thermal stress relief", Elsevier BV, (2013), Vol 46, No : 713-723
- "A novel magnetostrictive torsional resonant transducer", Elsevier BV, (2013), Vol 195, No : 71-78
- "A new hybrid longitudinal–torsional magnetostrictive ultrasonic transducer", IOP Publishing, (2013), Vol 22, No 6: 065013
- "Study on the Magnetic Hysteresis of Terfenol-D Using New Hybrid Model", Trans Tech Publications, Ltd., (2014), Vol 605, No : 519-522
- "An approach to design and fabrication of a piezo-actuated microdroplet generator", Springer Science and Business Media LLC, (2013), Vol 70, No 5-8: 1091-1099
- "Voltage-induction synchronous electrostatic motor", Springer Science and Business Media LLC, (2014), Vol 77, No 1-4: 145-164
- "Study on classical and excess eddy currents losses of Terfenol-D", Elsevier BV, (2015), Vol 388, No : 150-159
- "Development of Magnetostrictive Resonant Torsional Vibrator", Institute of Electrical and Electronics Engineers (IEEE), (2015), Vol 51, No 9: 1-8
- "Design and simulation of multi-resonance sonic transducer using Terfenol-D", SPIE, (2015), Vol , No :
- "Comparative discussion between first and second modes of Terfenol-D transducer", SPIE, (2015), Vol , No :
- "Analytical, numerical and experimental investigation of a giant magnetostrictive (GM) force sensor", Emerald, (2015), Vol 35, No 4: 357-365
- "A combined Preisach–Hyperbolic Tangent model for magnetic hysteresis of Terfenol-D", Elsevier BV, (2015), Vol 396, No : 38-47
- "On the use of giant magnetostrictive materials in sonic transducers for liquid atomizers", SPIE, (2016), Vol , No :
- "Lamb wave feature extraction using discrete wavelet transformation and Principal Component Analysis", SPIE, (2016), Vol , No :
- "Experimental investigation on dependency of Terfenol-D transducers performance on working conditions", SPIE, (2016), Vol , No :
- "Effect of magnetic field on mechanical properties in Permendur", Elsevier BV, (2016), Vol 651, No : 598-603
- "Analytical model of a giant magnetostrictive resonance transducer", SPIE, (2016), Vol , No :
- "An approach to design and fabrication of resonant giant magnetostrictive transducer", Techno-Press, (2016), Vol 17, No 2: 313-325
- "A new design of Electrostatic Traveling Wave (ETW) micropump and the effect of parameters on the flow rate", Elsevier BV, (2016), Vol 48, No : 8-14
- "Simulation and investigation of a particle positioning device performance by acoustophoretic phenomenon", IEEE, (2016), Vol , No :
- "Reduction of magneto rheological dampers stiffness by incorporating of an eddy current damper", Elsevier BV, (2017), Vol 396, No : 51-68
- "Interdigitated electrode design and optimization for dielectrophoresis cell separation actuators", Elsevier BV, (2017), Vol 86, No : 41-49
- "Electrowetting based actuation of droplets with PDMS dielectric", IEEE, (2016), Vol , No :
- "Development of Gasoline Direct Injector Using Giant Magnetostrictive Materials", Institute of Electrical and Electronics Engineers (IEEE), (2017), Vol 53, No 1: 521-529
- "Development of a hybrid DEP-SAW device for trapping/sensing target cells", Elsevier BV, (2018), Vol 141, No : 355-361
Conference Papers
- طراحی و ساخت عملگر پنوماتیک ضربه ای با فشار هوای ثابت ارائه شده در 8th National Conference on Modern Studies and Resech in Computer, Electrical, and Mechanical Sciences of Iran (1401)
- مدلسا زی عددی حسگر آلتراسونیک و بررسی ماده مناسب و هندسه بر عملکرد آ ن ارائه شده در The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran (1401)
- توسعه یک حسگر دیجیتال تنش برشی بر اساس اختلاف فاز القایی ، به منظور پیشگیری از زخم بستر ارائه شده در The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran (1401)
- تعیین فرکانس رزونانس یک دیسک پیزوالکتریک توسط ضربه و مقایسه آن با نتایح شبیه سازی ارائه شده در The 19th National Conference and the 8th International Conference on Construction and Production Engineering of Iran (1401)
- طراحی و ساخت عملگر پنوماتیک ضربه ای با فشار هوای ثابت ارائه شده در 17th National Conference and 6th International Conference on Manufacturing Engineering (1399)
- طراحی جداساز ارتعاشی برای واحد سنجش اینرسی مجموعه ناوبری پرنده بدون سرنشین ارائه شده در 17th National Conference and 6th International Conference on Manufacturing Engineering (1399)
- تعلیق و جداسازی ذرات با ضرایب کنتراست و حجم های مختلف به وسیله پدیده آکوستوفرتیک ارائه شده در 17th National Conference and 6th International Conference on Manufacturing Engineering (1399)
- بررسی اثر راستای اعمال ارتعاشات برانتشار موج در موتورآلتراسونیک کروی با استاتور سیمی ارائه شده در 17th National Conference and 6th International Conference on Manufacturing Engineering (1399)
- طراحی و ساخت عملگر جابه جایی قطرات بر پایه الکترووتینگ در دو بعد همراه با تشخیص موقعیت دقیق قطره ارائه شده در 17th National Conference and 6th International Conference on Manufacturing Engineering (1399)
- بررسی اثر هندسه ی الکترودها بر نیروی الکترواستاتیک در تعلیق الکترواستاتیک ارائه شده در International Conference on Manufacturing Engineering (1398)
- هولوگرام های آکوستیکی به منظور جابه جایی ذرات ارائه شده در International Conference on Manufacturing Engineering (1398)
- طبقه بندی بطری های پلاستیکی با استفاده از ویژگی هیستوگرام شدت روشنایی جهت تفکیک در مبدا ارائه شده در International Conference on Manufacturing Engineering (1398)
- شبیه سازی عددی موقعیت دهی یک بعدی اجسام مبتنی بر تکنولوژی موتورسنکرون خطی با آهنربای دایم ارائه شده در International Conference on Electrical, Computer and Mechanics of Iran (1397)
- مروری بر اسناد بین المللی و جنبه های تحقق اقتصاد سبز با ارایه چارچوب های کلی مالیات سبز ارائه شده در International Conference on Society and Environment (1397)
- Theoretical and experimental investigation of fluid motion in an Electrohydrodynamic micropump ارائه شده در International Conference on Research in Engineering, Science and Technology (1394)
- تاثیر معاینه فنی بر آلودگی هوای شهر تهران ارائه شده در The 14th International Conference on Traffic and Transportation Engineering (1394)
- طراحی و توسعه ربات دیوار نورد با استفاده از نیروی جاذبه الکترواستاتیک و بررسی پارامترهای موثر بر نیروی جاذبه آن ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- توسعه میکروپمپ الکترواسموزی موج روان - و بررسی تجربی تاثیر فرکانس و ولتاژ برعملکرد آن ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- شبیه سازی رفتار مغناطیسی مکانیکی ترفنول- دی برای استفاده در سنسورنیروی دینامیکی و استاتیکی ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- شبیه سازی حالت گذرای حرارتی دستگاه پی.سی .آر به روش فلوئیدیک ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- طراحی و ساخت دستگاه پی.سی.آر به روش فلوئیدیک ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- طراحی و ساخت عملگر پیزوالکتریکی جابجاکننده کاغذ ارائه شده در The Second National Conference on Applied Research in Electrical, Mechanical and Mechatronics (1393)
- دسته بندی میکروپمپ های پیزوالکتریکی برحسب مکانیزم عملکرد ارائه شده در Iranian National Conference on Mechanical Engineering (1392)
- مطالعه تجربی و مدلسازی تئوری پسماند مغناطیسی در ترفنل- دی ارائه شده در 21st Annual International Conference on Mechanical Engineering (1392)
- Study on MR Nanocomposites to Develop a Miniature Gripper ارائه شده در 1st New and Advanced Materials International Congress (1391)
- بررسی رفتارنرم شدگی آکوستیکی مواد دراثراعمال ارتعاشات اولتراسونیک ارائه شده در 2nd International Conference on Acoustics and Vibration (1391)
- بررسی تطبیقی سامانه متروی تهران با متروی توکیو ارائه شده در 12th International Conference on Traffic and Transportation Engineering (1391)
- Study on Eddy Currents Losses in Transducers Using Terfenol-D ارائه شده در 19th Annual Conference on Mechanical Engineering (ISME2011) (1390)
- طراحی و ساخت موتور خطی الکترواستاتیکبا کنترل مدار باز ارائه شده در 19th Annual Conference on Mechanical Engineering (ISME2011) (1390)
- Investigation of Operational Conditions in Resonant Actuator Using Terfenol-D ارائه شده در 19th Annual Conference on Mechanical Engineering (ISME2011) (1390)
- بررسی مسائل و مشکلات فنی و ساختاری خودروهای تولید داخل پراید در بروز تصادفات ارائه شده در The 1st Conference on Traffic Safety (1390)
- موقعیت دهی دقیق یک دیسک به کمک موتور الکترواستاتیکی ارائه شده در 11th Iranian Conference on Manufacturing Engineering (ICME 2010) (1389)
- طراحی و ساخت یاتاقان مغناطیسی فعال برای کار در دور دوم 5000rpm ارائه شده در 11th Iranian Conference on Manufacturing Engineering (ICME 2010) (1389)
- بررسی تئوری و تجربی افت پسماند در ماده دگررسان مغناطیسی ترفنل -دی ارائه شده در 11th Iranian Conference on Manufacturing Engineering (ICME 2010) (1389)
- امکان سنجی استفاده از ماده دگررسان مغناطیسی ترفنل - دی درریزپاشی مایعات ارائه شده در 10th Conference of Iranian Aerospace Society (1389)
- طراحی، تحلیل و ساخت یک دستگاه تغذیه کاغذ القایی ارائه شده در 10th Iranian Conference on Manufacturing Engineering (ICME 2010) (1388)
- Rotational Electrostatic Motor with Air Bearing ارائه شده در 16th Iranian Conference on Electric Engineering (1387)
- Bibliographical Survey on Power System Restoration Difficulties ارائه شده در 16th Iranian Conference on Electric Engineering (1387)
- طراحی بهینه مکانیزم موقعیتدهی دقیق با استفاده از ضربه نیوماتیک ارائه شده در 15th Annual Conference of Mechanical Engineering (1386)
- بررسی تئوری و تجربی پدیده ضربان در محیط های مایع تحت اثر امواج مافوق صوت و بررسی پدیده خوردگی فلز آلومینیوم در فرآیند شستشوی التراسونیک ارائه شده در 15th Annual Conference of Mechanical Engineering (1386)
- طراحی و ساخت دستگاهی برای جابجایی پودر به روش میدانهای الکتریکی در حال تغییر و تحلیل آماری پارامترهای موثر بر سرعت خطی ذرات در یک نمونه پودر فلزی ارائه شده در 02nd Tehran International Congress on Manufacturing Engineering (TICME2007) (1386)
- طراحی و ساخت موتور الکترواستاتیکی و بررسی پارامترهای موثر بر عملکرد آن ارائه شده در 02nd Tehran International Congress on Manufacturing Engineering (TICME2007) (1386)
- موقعیت دهی دقیق توسط ضربه کنترل شده هوا ارائه شده در 02nd Tehran International Congress on Manufacturing Engineering (TICME2007) (1386)
- طراحی و ساخت یک پاک کننده التراسونیک و تاثیر پارامترهای فرکانس، دما و فرسایش بر روی آن ارائه شده در 02nd Tehran International Congress on Manufacturing Engineering (TICME2007) (1386)
- طراحی و ساخت مکانیزم موقعیتدهی دقیق با استفاده از ضربه نیوماتیک ارائه شده در 14th Annual Conference of Mechanical Engineering (1385)
- MAGNETIC LEVITATION USING SLIDING MODE CONTROL FOR ACTIVE MAGNETIC BEARING SYSTEM ارائه شده در 14th Annual Conference of Mechanical Engineering (1385)
- طراحی و ساخت سنسورارتعاشی مغناطیسی برای فرکانس های پایین و دامنه بسیارکم ارائه شده در 13th Annual Conference of Mechanical Engineering (1384)
- Design and manufacturing of an ultra sensitive seismic sensor ارائه شده در 01st Tehran International Congress on Manufacturing Engineering (TICME2005) (1384)
- ساخت دستگاه درجه بندی پسته براساس ماشین بینایی ارائه شده در 02nd Iranian Conference on Machine Vision and Image Processing (1381)
- سیاست های اجرایی معاونت محیط زیست انسانی ارائه شده در 05th National Congress On Environmental Health (1381)
- Force Determination in Variable Reluctance Linear Stepper Motor: Comparison of Analytical, Numerical and Experimental Results ارائه شده در 05th Iranian Conference on Manufacturing Engineering (1381)
- جنبه های زیست محیطی سیستم حمل و نقل (عملکردها و افق های آتی) ارائه شده در 2nd Regional Conference on Traffic Management (1380)
- کنترل میکرواستپ ارائه شده در ISME02international conference of the Iranian Society of Mechanical Engineers (1374)
Journal Papers
- تعلیق و به دام انداختن ذرات با ضریب کنتراست مثبت و بررسی تاثیر حجم در محیط مایع به وسیله پدیده آکوستوفرتیک منتشر شده در Iranian Journal of Manufacturing Engineering (1401)
- آموزش عالی و توسعه در چین منتشر شده در Journal of Industry and University (1399)
- پایش لرزشهای بسامد بزرگ در اتاقهای آزمون موتور به کمک لرزهگیرهای بادی نیمه فعال با پایشگر PID منتشر شده در The Journal of Engine Research (1389)
- فعالیت های توسعه تکنولوژی در بخش صنعت سنگین منتشر شده در Civil Engineering Sharif (1371)