معرفی
استان
تهران
شهر
تهران
سمتهای علمی و اجرایی علیرضا عشوری در مجلات و ژورنال‌های معتبر ایران
- فصلنامه پیشرفت ها در فناوری محیط زیست (هیات تحریریه)
سمتهای علمی و اجرایی علیرضا عشوری در کنفرانس ها و نشستهای معتبر ایران
- سومین کنفرانس کاتالیست انجمن شیمی ایران (رئیس کنفرانس)
- سازمان پژوهشهای علمی و صنعتی ایران (ریاست)
مقالات بین المللی علیرضا عشوری
"Double in-situ lignin modification in surfactant-assisted glycerol organosolv pretreatment of sugarcane bagasse towards efficient enzymatic hydrolysis", Elsevier BV, (2024), Vol 481, No : 148713
"Dual assistance of surfactants in glycerol organosolv pretreatment and enzymatic hydrolysis of lignocellulosic biomass for bioethanol production", Elsevier BV, (2024), Vol 395, No : 130358
"Extraction of phenolic compounds from hydrothermal processing of black liquor: Effect of reactor type and pH of recovered liquid phase", Elsevier BV, (2023), Vol 470, No : 144269
"Preparation and characterization of plywood panels using recycled HDPE as a formaldehyde-free adhesive: A comparative study", Informa UK Limited, (2023), Vol 43, No 5: 298-307
"Enhancing interfacial adhesion through coupling agent incorporation in plywood/ plastic waste composite materials", Elsevier BV, (2023), Vol 127, No : 103513
"Recent developments in nanocellulose-based aerogels as air filters: A review", Elsevier BV, (2023), Vol 246, No : 125721
"Application of Cellulose-Based Materials as Water Purification Filters; A State-of-the-Art Review", Springer Science and Business Media LLC, (2023), Vol 32, No 1: 345-366
"Employing Cellulose Nanofiber-Based Hydrogels for Burn Dressing", MDPI AG, (2022), Vol 14, No 6: 1207
"Development of Cellulose Aerogel as a New Material for the Reduction of Harmful Substances in Cigarette Smoke", Research Square Platform LLC, (2022), Vol , No :
"Development of Cellulose Aerogel as a New Material for the Reduction of Harmful Substances in Cigarette Smoke", Springer Science and Business Media LLC, (2022), Vol 30, No 10: 4418-4426
"A Comparative Study on the Mechanical and Physical Properties of Plywood Panels Prepared by Chitosan as Bio-Adhesive", Springer Science and Business Media LLC, (2022), Vol 30, No 10: 4263-4270
"Modified cellulose nanofibers aerogels as a novel air filters; Synthesis and performance evaluation", Elsevier BV, (2022), Vol 203, No : 601-609
"Fabrication and characterization of bilayer scaffolds - nanocellulosic cryogels - for skin tissue engineering by co-culturing of fibroblasts and keratinocytes", Elsevier BV, (2022), Vol 223, No : 100-107
"Preparation and characterization of air nanofilters based on cellulose nanofibers", Elsevier BV, (2021), Vol 182, No : 1392-1398
"Modification of chitosan using amino acids for wound healing purposes: A review", Elsevier BV, (2021), Vol 258, No : 117675
"Preparation of chitosan-based composites with urethane cross linkage and evaluation of their properties for using as wound healing dressing", Elsevier BV, (2020), Vol 230, No : 115606
"A promising process to modify cellulose nanofibers for carbon dioxide (CO2) adsorption", Elsevier BV, (2020), Vol 230, No : 115571
"Preparation and characterization of polyhydroxybutyrate-co-valerate (PHBV) as green composites using nano reinforcements", Elsevier BV, (2019), Vol 136, No : 1119-1124
"Characterization and properties of polyethersulfone/ modified cellulose nanocrystals nanocomposite membranes", Elsevier BV, (2019), Vol 76, No : 333-339
"A Review on Date Palm Tree: Properties, Characterization and Its Potential Applications", Computers, Materials and Continua (Tech Science Press), (2019), Vol 7, No 11: 1055-1075
"Thermoplastic starch foamed composites reinforced with cellulose nanofibers: Thermal and mechanical properties", Elsevier BV, (2018), Vol 197, No : 305-311
"Preparation and characterization of thermoplastic starch and cellulose nanofibers as green nanocomposites: Extrusion processing", Elsevier BV, (2018), Vol 112, No : 442-447
"Glass fiber-reinforced epoxy composite with surface-modified graphene oxide: enhancement of interlaminar fracture toughness and thermo-mechanical performance", Springer Science and Business Media LLC, (2018), Vol 76, No 1: 259-270
"Effect of cellulose nanocrystals on performance of polyethersulfone nanocomposite membranes using electrospinning technique", Wiley, (2018), Vol 40, No S1:
"Preparation and characterization of reinforced papers using nano bacterial cellulose", Elsevier BV, (2017), Vol 101, No : 334-340
"Mechanical and acoustical properties of particleboards made with date palm branches and vermiculite", Elsevier BV, (2017), Vol 60, No : 153-159
"Hybrid thermoplastic composites using nonwood plant fibers", Elsevier, (2017), Vol , No : 39-56
"Potential of magnetite reduced graphene oxide/chitosan nanocomposite as biosorbent for the removal of dyes from aqueous solutions", Wiley, (2017), Vol 39, No S1:
"Chemical modification of soybean flour‐based adhesives using acetylated cellulose nanocrystals", Wiley, (2017), Vol 39, No 10: 3618-3625
"Properties and Utilization of Plant Fibers and Nanocellulose for Thermoplastic Composites", Wiley, (2016), Vol , No : 405-428
"Viscoelastic response and interlaminar delamination resistance of epoxy/glass fiber/functionalized graphene oxide multi-scale composites", Elsevier BV, (2016), Vol 54, No : 186-195
"Preparation and characterization of sodium carboxymethyl cellulose/silk fibroin/graphene oxide nanocomposite films", Elsevier BV, (2016), Vol 52, No : 218-224
"Preparation and characterization of acetylated starch nanoparticles as drug carrier: Ciprofloxacin as a model", Elsevier BV, (2016), Vol 87, No : 48-54
"Optimization of mechanical properties of polypropylene/talc/graphene composites using response surface methodology", Elsevier BV, (2016), Vol 53, No : 283-292
"Mechanical and thermo-mechanical properties of short carbon fiber reinforced polypropylene composites using exfoliated graphene nanoplatelets coating", Elsevier BV, (2016), Vol 38, No : 37-42
"Effect of ozone pretreatment on the physical and mechanical properties of particleboard panels made from bagasse", Elsevier BV, (2016), Vol 94, No : 451-455
"Bacterial cellulose composites loaded with SiO 2 nanoparticles: Dynamic-mechanical and thermal properties", Elsevier BV, (2016), Vol 93, No : 672-677
"Acoustical properties of plywood/waste tire rubber composite panels", Elsevier BV, (2016), Vol 94, No : 382-387
"Natural Fiber Composites", CRC Press, (2015), Vol , No :
"Utilization of waste tire rubber in hybrid plywood composite panel", Wiley, (2015), Vol 26, No 8: 1034-1040
"Suitability of sorghum stalk fibers for production of particleboard", Elsevier BV, (2015), Vol 120, No : 15-21
"Production of bacterial cellulose using different carbon sources and culture media", Elsevier BV, (2015), Vol 117, No : 518-523
"Preparation of graphene oxide/chitosan/FeOOH nanocomposite for the removal of Pb(II) from aqueous solution", Elsevier BV, (2015), Vol 80, No : 475-480
"Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites", Elsevier BV, (2015), Vol 48, No : 82-88
"Elastic Properties of Carbon Fibre-Reinforced Epoxy Composites", SAGE Publications, (2015), Vol 23, No 7: 475-482
"Biodegradability and mechanical properties of reinforced starch nanocomposites using cellulose nanofibers", Elsevier BV, (2015), Vol 132, No : 1-8
"Surface modification of carbon fiber for improving the interfacial adhesion between carbon fiber and polymer matrix", Wiley, (2015), Vol 27, No 6: 805-811
"Alternative Solutions for Reinforcement of Thermoplastic Composites", CRC Press, (2015), Vol , No : 65-92
"Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks", Elsevier BV, (2014), Vol 50, No : 432-436
"Thermoplastic Hybrid Composites using Bagasse, Corn Stalk and E-glass Fibers: Fabrication and Characterization", Informa UK Limited, (2014), Vol 53, No 1: 1-8
"Solvent-free acetylation of cellulose nanofibers for improving compatibility and dispersion", Elsevier BV, (2014), Vol 102, No : 369-375
"Removal of Acid Orange 7 from aqueous solution using magnetic graphene/chitosan: A promising nano-adsorbent", Elsevier BV, (2014), Vol 68, No : 218-224
"Preparation and characterization of modified cellulose nanofibers reinforced polylactic acid nanocomposite", Elsevier BV, (2014), Vol 35, No : 73-79
"Modification of Physico-Mechanical Properties of Chitosan-Tapioca Starch Blend Films Using Nano Graphene", Informa UK Limited, (2014), Vol 53, No 3: 312-318
"Effects of hemicellulose pre-extraction and cellulose nanofiber on the properties of rice straw pulp", Elsevier BV, (2014), Vol 68, No : 198-204
"Characterization and biodegradability of polypropylene composites using agricultural residues and waste fish", Elsevier BV, (2014), Vol 56, No : 279-283
"Hybrid composite using recycled polycarbonate/waste silk fibers and wood flour", Wiley, (2014), Vol 37, No 6: 1667-1673
"Wood plastic composite using graphene nanoplatelets", Elsevier BV, (2013), Vol 58, No : 1-6
"Utilization of sugarcane molasses as a dry-strength additive for old corrugated container recycled paper", Elsevier BV, (2013), Vol 45, No 1: 1595-1600
"Study on the effects of white rice husk ash and fibrous materials additions on some properties of fiber–cement composites", Elsevier BV, (2013), Vol 117, No : 263-267
"Quantitative palynostratigraphy and palaeoecology of Tethyan Paleocene–Eocene red beds in north of Zagros sedimentary basin, Iran", Springer Science and Business Media LLC, (2013), Vol 8, No 2: 827-838
"Preparation of cellulose/polyvinyl alcohol biocomposite films using 1-n-butyl-3-methylimidazolium chloride", Elsevier BV, (2013), Vol 62, No : 379-386
"Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes", Elsevier BV, (2013), Vol 92, No 1: 865-871
"Pre-extraction of hemicelluloses from bagasse fibers: Effects of dry-strength additives on paper properties", Elsevier BV, (2013), Vol 43, No : 365-371
"Improving wet and dry strength properties of recycled old corrugated carton (OCC) pulp using various polymers", Elsevier BV, (2013), Vol 94, No 1: 577-583
"Effects of hot water pre-extraction on surface properties of bagasse soda pulp", Elsevier BV, (2013), Vol 33, No 2: 613-617
"Effects of dissolution of some lignocellulosic materials with ionic liquids as green solvents on mechanical and physical properties of composite films", Elsevier BV, (2013), Vol 95, No 1: 57-63
"Effects of chemical preservative treatments on durability of wood flour/HDPE composites", Elsevier BV, (2013), Vol 47, No : 308-313
"Effect of chitosan and cationic starch on the surface chemistry properties of bagasse paper", Elsevier BV, (2013), Vol 58, No : 343-348
"Wood Plastic Composite Panels: Influence of the Species, Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners", Springer Science and Business Media LLC, (2013), Vol 22, No 2: 260-266
"Mechanical properties of carbon fiber/epoxy composites: Effects of number of plies, fiber contents, and angle-ply layers", Wiley, (2013), Vol 54, No 11: 2676-2682
"Effects of nano-graphene on the physico-mechanical properties of bagasse/polypropylene composites", Springer Science and Business Media LLC, (2013), Vol 71, No 2: 337-349
"Effects of graphene on the behavior of chitosan and starch nanocomposite films", Wiley, (2013), Vol 54, No 10: 2258-2263
"Application of soybean stalk for the removal of hazardous dyes from aqueous solutions", Wiley, (2013), Vol 54, No 1: 239-245
"Strength-enhancing effect of cationic starch on mixed recycled and virgin pulps", Elsevier BV, (2012), Vol 87, No 2: 1269-1274
"Removal of Acid Orange 7 and Remazol Black 5 reactive dyes from aqueous solutions using a novel biosorbent", Elsevier BV, (2012), Vol 32, No 6: 1394-1400
"Potential of Canola Stalk as Biosorbent for the Removal of Remazol Black B Reactive Dye from Aqueous Solutions", Informa UK Limited, (2012), Vol 32, No 4: 328-341
"Large-scale biodiesel production using microalgae biomass of Nannochloropsis", Elsevier BV, (2012), Vol 39, No : 449-453
"Investigation on the surface properties of chemically modified natural fibers using inverse gas chromatography", Elsevier BV, (2012), Vol 87, No 4: 2367-2375
"Influence of mild alkaline treatment on the cellulosic surfaces active sites", Elsevier BV, (2012), Vol 88, No 4: 1293-1298
"Impacts of wood preservative treatments on some physico-mechanical properties of wood flour/high density polyethylene composites", Elsevier BV, (2012), Vol 35, No : 246-250
"Evaluation of using waste timber railway sleepers in wood–cement composite materials", Elsevier BV, (2012), Vol 27, No 1: 126-129
"Bacterial cellulose/silica nanocomposites: Preparation and characterization", Elsevier BV, (2012), Vol 90, No 1: 413-418
"A comparative study on the effects of Coriolus versicolor on properties of HDPE/wood flour/paper sludge composites", Elsevier BV, (2012), Vol 43, No 5: 2409-2414
"Wood–wool cement board using mixture of eucalypt and poplar", Elsevier BV, (2011), Vol 34, No 1: 1146-1149
"Performance characterizations of particleboards made with wheat straw and waste veneer splinters", Elsevier BV, (2011), Vol 42, No 7: 2085-2089
"Nano-SiO2 filled rice husk/polypropylene composites: Physico-mechanical properties", Elsevier BV, (2011), Vol 33, No 1: 183-187
"Mechanical and physical properties of wheat straw boards bonded with a tannin modified phenol–formaldehyde adhesive", Elsevier BV, (2011), Vol 42, No 2: 176-180
"Fiber reinforced cement boards made from recycled newsprint paper", Elsevier BV, (2011), Vol 528, No 25-26: 7801-7804
"Evaluation of surface roughness and mechanical properties of particleboard panels made from bagasse", Elsevier BV, (2011), Vol 42, No 5: 1330-1335
"Dimensional Stability and Water Uptake Properties of Cement-Bonded Wood Composites", Springer Science and Business Media LLC, (2011), Vol 19, No 2: 518-521
"Current and potential capabilities of biomass for green energy in Iran", Elsevier BV, (2011), Vol 15, No 9: 4934-4938
"Biomass and lipid productivities of marine microalgae isolated from the Persian Gulf and the Qeshm Island", Elsevier BV, (2011), Vol 35, No 5: 1935-1939
"Bacterial synthesized cellulose nanofibers; Effects of growth times and culture mediums on the structural characteristics", Elsevier BV, (2011), Vol 86, No 3: 1187-1191
"Effect of extractives on the performance properties of wood flour‐polypropylene composites", Wiley, (2011), Vol 123, No 3: 1563-1567
"Cement-bonded composite boards made from poplar strands", Elsevier BV, (2011), Vol , No :
"Wood plastic composites from agro-waste materials: Analysis of mechanical properties", Elsevier BV, (2010), Vol 101, No 7: 2525-2528
"Study on Mechanical Properties of Wood Fiber/Polypropylene Composites", Trans Tech Publications, Ltd., (2010), Vol 123-125, No : 1195-1198
"Reinforced polypropylene composites: Effects of chemical compositions and particle size", Elsevier BV, (2010), Vol 101, No 7: 2515-2519
"Performance properties of microcrystalline cellulose as a reinforcing agent in wood plastic composites", Elsevier BV, (2010), Vol 41, No 7: 578-581
"Mechanical and thermo-chemical properties of wood-flour/polypropylene blends", Springer Science and Business Media LLC, (2010), Vol 65, No 7: 691-700
"Hybrid composites made from recycled materials: Moisture absorption and thickness swelling behavior", Elsevier BV, (2010), Vol 101, No 12: 4717-4720
"Bio-based composites from waste agricultural residues", Elsevier BV, (2010), Vol 30, No 4: 680-684
"Water resistance and thermal stability of hybrid lignocellulosic filler–PVC composites", Springer Science and Business Media LLC, (2010), Vol 66, No 6: 797-802
"Preparation and characterization of polypropylene/wood flour/nanoclay composites", Springer Science and Business Media LLC, (2010), Vol 69, No 4: 663-666
"Lemon Balm (Melissa officinalis) Stalk: Chemical Composition and Fiber Morphology", Springer Science and Business Media LLC, (2010), Vol 19, No 1: 297-300
"Effects of Waste Paper Sludge on the Physico-Mechanical Properties of High Density Polyethylene/Wood Flour Composites", Springer Science and Business Media LLC, (2010), Vol 19, No 1: 120-124
"Studies on Iranian cultivated paulownia – a potential source of fibrous raw material for paper industry", Springer Science and Business Media LLC, (2009), Vol 67, No 3: 323-327
"Properties of Medium Density Fiberboard Based on Bagasse Fibers", SAGE Publications, (2009), Vol 43, No 18: 1927-1934
"Preparation and Properties of Wood Plastic Composites Made of Recycled High-density Polyethylene", SAGE Publications, (2009), Vol 43, No 8: 877-883
"Influence of nanoclay and coupling agent on the physical and mechanical properties of polypropylene/bagasse nanocomposite", Wiley, (2009), Vol 112, No 3: 1386-1390
"Errata", SAGE Publications, (2009), Vol 43, No 26: 3326-3326
"Evaluation of Calotropis gigantea as a Promising Raw Material for Fiber-reinforced Composite", SAGE Publications, (2009), Vol 43, No 11: 1297-1304
"Errata", SAGE Publications, (2009), Vol 43, No 26: 3326-3326
"Effects of Nanoclay as a Reinforcement Filler on the Physical and Mechanical Properties of Wood-based Composite", SAGE Publications, (2009), Vol 43, No 18: 1869-1875
"Characteristics of wood–fiber plastic composites made of recycled materials", Elsevier BV, (2009), Vol 29, No 4: 1291-1295
"Particleboard made from waste paper treated with maleic anhydride", SAGE Publications, (2009), Vol 28, No 1: 51-55
"Hybrid Composites from Waste Materials", Springer Science and Business Media LLC, (2009), Vol 18, No 1: 65-70
"Effects of Particle Size and Coupling Agent Concentration on Mechanical Properties of Particulate-filled Polymer Composites", SAGE Publications, (2009), Vol 23, No 2: 169-174
"Wood–plastic composites as promising green-composites for automotive industries!", Elsevier BV, (2008), Vol 99, No 11: 4661-4667
"Surface topography of kenaf (Hibiscus cannabinus) sized papers", Elsevier BV, (2008), Vol 99, No 2: 404-410
"Municipal Solid Waste as a Source of Lignocellulosic Fiber and Plastic for Composite Industries", Informa UK Limited, (2008), Vol 47, No 8: 741-744
"Highly Fiber-Loaded Composites: Physical and Mechanical Properties", SAGE Publications, (2008), Vol 16, No 5: 343-347
"Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials", Elsevier BV, (2008), Vol 28, No 2: 225-230
"Effect of a Novel Coupling Agent, Polybutadiene Isocyanate, on Mechanical Properties of Wood-Fiber Polypropylene Composites", SAGE Publications, (2008), Vol 27, No 16-17: 1679-1687
"Giant Milkweed (Calotropis persica) Fibers — A Potential Reinforcement Agent for Thermoplastics Composites", SAGE Publications, (2008), Vol 28, No 17: 2143-2149
"Erratum", SAGE Publications, (2008), Vol 28, No 3: 379-379
"Evaluation of the Physical and Mechanical Properties of Medium Density Fiberboard Made from Old Newsprint Fibers", SAGE Publications, (2008), Vol 29, No 1: 5-11
"Printability of Sized Kenaf (Hibiscus cannabinus) Papers", Informa UK Limited, (2007), Vol 46, No 7: 683-687
"Pulp and paper from kenaf bast fibers", Springer Science and Business Media LLC, (2006), Vol 7, No 1: 26-29
"Nonwood Fibers—A Potential Source of Raw Material in Papermaking", Informa UK Limited, (2006), Vol 45, No 10: 1133-1136
"Enhancing Dry-Strength Properties of Kenaf (Hibiscus cannabinus) Paper Through Chitosan", Informa UK Limited, (2006), Vol 45, No 1: 125-129
"Effect of Totally Chlorine Free and Elemental Chlorine Free Sequences on Whole Stem Kenaf (Hibiscus cannabinus) Pulp Characteristics", Informa UK Limited, (2006), Vol 45, No 2: 205-211
"Effect of Accelerated Aging on Properties of Kenaf(Hibiscus cannabinus) Paper Sized with Various Polymers", Informa UK Limited, (2006), Vol 45, No 2: 213-216
"Chemical and Morphological Characteristics of Malaysian Cultivated Kenaf (Hibiscus cannabinus) Fiber", Informa UK Limited, (2006), Vol 45, No 1: 131-134
"Effect of chitosan addition on the surface properties of kenaf (Hibiscus cannabinus) paper", Springer Science and Business Media LLC, (2005), Vol 6, No 2: 174-179
مقالات علیرضا عشوری در کنفرانس های داخلی
استفاده از ملاس به عنوان جایگزین بخشی از الیاف سلولزی درکاغذ به منظور افزایش مقاومت آن
سال 1391
ارائه شده در ششمین همایش ملی و اولین همایش بین المللی مدیریت پسماند
استفاده از مواد ضایعاتی پلیمری و سلولزی شهری درتولید کامپوزیت های چوب / پلاستیک
سال 1391
ارائه شده در ششمین همایش ملی و اولین همایش بین المللی مدیریت پسماند
نانو چندسازه های چوب پلاستیک
سال 1393
ارائه شده در دومین همایش ملی فن آوری های نوین در صنایع چوب و کاغذ
Effect of Functionalized Graphene Oxide on theProperties of Epoxy/Carbon Fiber Nanocomposites
سال 1393
ارائه شده در چهارمین کنفرانس بین المللی کامپوزیت
Chemical Modification of Carbon Fiber to Improveits Performance in Carbon Fiber/ Epoxy Composites
سال 1393
ارائه شده در چهارمین کنفرانس بین المللی کامپوزیت
Effect of graphene oxide on viscoelastic properties of epoxy/glass fiber composites
سال 1395
ارائه شده در دومین کنفرانس بین المللی یافته های نوین پژوهشی در شیمی و مهندسی شیمی
تهیه نانوذرات استات نشاسته پیوندی با لاکتیک اسید و کاربرد آن به عنوان حامل دارو
سال 1395
ارائه شده در دومین کنفرانس بین المللی یافته های نوین پژوهشی در شیمی و مهندسی شیمی
Dynamic mechanical properties of polypropylene/short carbon fiber composites reinforced with graphene nanoplatelets
سال 1395
ارائه شده در اولین کنفرانس ملی کاربرد کامپوزیت ها در صنعت ساخت
Effect of graphene oxide on Mode-I interlaminar fracture toughness of epoxy/ glass fiber composites
سال 1395
ارائه شده در اولین کنفرانس ملی کاربرد کامپوزیت ها در صنعت ساخت
نانو چند سازه های چوب پلاستیک
سال 1396
ارائه شده در چهارمین همایش ملی نانو فناوری در کشاورزی
Utilization of Agro-Waste Fibers in Plastic Composites; A Comparative Study
سال 1395
ارائه شده در پنجمین کنفرانس بین المللی کامپوزیت
مقالات علیرضا عشوری در ژورنال های داخلی
ساخت پانل های سقفی کاذب با استفاده از پسماند جامد جوهرزدایی از کاغذ بازیافتی
سال 1392
ارائه شده در فصلنامه مهندسی عمران و محیط زیست دانشگاه تبریز
اثر نشاسته کاتیونی و کیتوسان بر مقاومت خشک خمیرکاغذرنگ بری شده حاصل از باگاس پیش استخراج شده وپیش استخراج نشده
سال 1391
ارائه شده در دوماهنامه علوم و تکنولوژی پلیمر
فوم نانوبیوکامپوزیت نشاسته ترموپلاستیک/نانوالیاف سلولز: بررسی خصوصیات مکانیکی و گرمایی
سال 1397
ارائه شده در مجله پژوهش های علوم و فناوری چوب و جنگل
بررسی تاثیر حلال و نرم کننده بر خواص مکانیکی بیونانوکامپوزیت های کیتوزان
سال 1398
ارائه شده در فصلنامه بسپارش
اثر نانوذرات بر خواص مکانیکی زیست کامپوزیت های بر پایه کیتوسان
سال 1398
ارائه شده در فصلنامه بسپارش
اصلاح شیمیایی سطحی نانوالیاف سلولزی با فتالیمید به منظور ساخت فیلتر هوا برای جذب دی اکسیدکربن
سال 1397
ارائه شده در فصلنامه تحقیقات علوم چوب و کاغذ ایران
ساخت بلوک های چوب سیمان با استفاده از خاکستر سبوس برنج و الیاف لیگنوسلولزی
سال 1392
ارائه شده در فصلنامه تحقیقات علوم چوب و کاغذ ایران
ترکیب شیمیایی پسماندهای جامد صنایع کاغذسازی
سال 1390
ارائه شده در فصلنامه تحقیقات علوم چوب و کاغذ ایران
بررسی تاثیر تیمار حرارتی و نانو ذرات بر ترشوندگی و مقاومت چسبندگی شفاف پوشه لاک الکل
سال 1400
ارائه شده در فصلنامه تحقیقات علوم چوب و کاغذ ایران
مروری بر خواص نانوفیلترهای حاصل از نانوالیاف سلولزی برای جذب آلاینده های هوا
سال 1399
ارائه شده در مجله صنایع چوب و کاغذ ایران
تاثیر غلظت نانوالیاف سلولز اصلاح شده با فتالیمید بر روی میزان جذب دی اکسیدکربن
سال 1398
ارائه شده در مجله صنایع چوب و کاغذ ایران
تاثیر افزودن نانو کریستال سلولز بر خواص فیلم های پلیمری پلی هیدروکسی بوتیرات کووالرات
سال 1398
ارائه شده در مجله صنایع چوب و کاغذ ایران
طرح های پژوهشی علیرضا عشوری
افزایش ویژگی های مکانیکی در نانو کامپوزیت های الیاف چوب/ پلیمر
سال 1390
ارائه شده در سازمان تحقیقات، آموزش و ترویج کشاورزی