عضویت در مجامع و انجمنهای علمی
- تحریریه گشتاور و الکتروگشتاور انجمن علمی مهندسی مکانیک دانشگاه تبریز
- عضو حقیقی انجمن مهندسين مکانیک ايران
- عضوحقیقی سازمان نظام مهندسی آذربایجان شرقی
- عضو حقیقی استعدادهای درخشان دانشگاه تبریز
- سردبیر نشریه انرژی نشریه انجمن انرژی دانشگاه تبریز
- دبیر کانون کارافرینی دانشگاه تبریز
- مدیرمسئول نشریه کارآفرین کانون کارآفرینی
- عضو حقیقی بنیاد نخبگان ایران
- عضو حقیقی انجمن انرژی های تجدیدپذیر ایران
ISI Papers
- "Heat transmission and magnetic effects on a ferrofluid liquid in a hybrid survey under the influence of two Helmholtz coils", Elsevier BV, (2022), Vol 16, No : 100702
- The Simulation of Car Impact at Diffrent Speeds by Abaqus and Ansys Software, Study the Results. and Development of an Appropriate Analytical Relationship
- "Computer simulation of Cu: ALOOH/Water in a microchannel heat sink using a porous media technique and solved by numerical analysis AGM and FEM", Elsevier BV, (2023), Vol , No : 100432
- "Numerical simulation of binary component separation with perforated on sheets of the structured packing", World Scientific Pub Co Pte Ltd, (2023), Vol , No :
- "Computational study of blood hemodynamic in ICA aneurysm with coiling embolism", World Scientific Pub Co Pte Ltd, (2023), Vol , No :
- "Investigating heat transfer and fluid flow betwixt parallel surfaces under the influence of hybrid nanofluid suction and injection with numerical analytical technique", Elsevier BV, (2023), Vol 70, No : 423-439
- "Numerical study of heat transfer of wavy channel supercritical CO2 PCHE with various channel geometries", Elsevier BV, (2023), Vol , No : 100330
- "Simulating and Comparing CO2/CH4 Separation Performance of Membrane–Zeolite Contactors by Cascade Neural Networks", MDPI AG, (2023), Vol 13, No 5: 526
- "Phase Equilibria Simulation of Biomaterial-Hydrogen Binary Systems Using a Simple Empirical Correlation", MDPI AG, (2023), Vol 11, No 3: 714
- "Optimizing the amount of concentration and temperature of substances undergoing chemical reaction using response surface methodology", Elsevier BV, (2023), Vol 17, No : 100270
- "Modeling the CO2 separation capability of poly(4-methyl-1-pentane) membrane modified with different nanoparticles by artificial neural networks", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Experimental Investigation and CFD Simulation of Cryogenic Condenser", MDPI AG, (2023), Vol 11, No 6: 1845
- "Influence of extruded injector nozzle on fuel mixing and mass diffusion of multi fuel jets in the supersonic cross flow: computational study", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "The hydrogen sensing capability of zinc oxide-containing sensors: Modeling by the general regression artificial neural network", Elsevier BV, (2023), Vol , No :
- "Optimization of process parameters for trimethoprim and sulfamethoxazole removal by magnetite-chitosan nanoparticles using Box–Behnken design", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Applying feature selection and machine learning techniques to estimate the biomass higher heating value", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Removal of ciprofloxacin and cephalexin antibiotics in water environment by magnetic graphene oxide nanocomposites; optimization using response surface methodology", Elsevier BV, (2023), Vol 20, No : 101507
- "Fuel mixing enhancement of transverse coaxial air and fuel jet by upstream shock wave on in scramjet engines: numerical study", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Application of multi-extruded fuel injectors for mixing enhancement of hydrogen gas at scramjet engine: computational study", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Impacts of morphology parameters on the risk of rupture in intracranial aneurysms: statistical and computational analyses", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Comparison of single and multi-coolant axial jets on the temperature reduction of nose cone with multiple-row disk", Elsevier BV, (2023), Vol 20, No : 101559
- "Influence of parent vessel feature on the risk of internal carotid artery aneurysm rupture via computational method", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Usage of computational method for hemodynamic analysis of intracranial aneurysm rupture risk in different geometrical aspects", Springer Science and Business Media LLC, (2023), Vol 13, No 1:
- "Modeling and optimization of efficient removal of diclofenac and naproxen based on chemometric approaches", Elsevier BV, (2024), Vol , No : 100238
- "Numerical investigation of increasing the efficiency of thermal photovoltaic system by changing the level of heat transfer distribution", Elsevier BV, (2024), Vol , No : 103989
- "An examination of the flow of Magnetohydrodynamic viscous fluid and heat transfer between penetrable disks using the Variation Iteration Method and Finite Element Method", Elsevier BV, (2024), Vol , No : 100593
- "Energy, exergy, economic, and sensitivity analyses of an enhanced liquid hydrogen production cycle within an innovative multi-generation system", Springer Science and Business Media LLC, (2024), Vol , No :
- "Combining artificial intelligence and computational fluid dynamics for optimal design of laterally perforated finned heat sinks", Elsevier BV, (2024), Vol , No : 102002
- "Thermal performance augmentation in a pipe employing hybrid nanofluid and a plate as turbulator with V-shaped double-winglet ribs", Springer Science and Business Media LLC, (2024), Vol 14, No 1:
- "A novel insight into the design of perforated-finned heat sinks based on a hybrid procedure: Computational fluid dynamics, machine learning, multi-objective optimization, and multi-criteria decision-making", Elsevier BV, (2024), Vol 155, No : 107535
- "Explanatory and numerical examination of the fractional conditions of blood stream in a limit, slanted supply route utilizing the Akbari Ganji technique", Elsevier BV, (2024), Vol , No : 100697
- "Employing the Akbari Ganji Method (AGM) to conduct a semi-analytical analysis of transient Eyring-Powell compressible flow in a tensile Surface under the influence of a magnetic field", Elsevier BV, (2024), Vol 10, No 11: e31914
- "Using phase change material nanoparticles for thermal storage to protect healthy tissues by hyperthermia method assisted by a magnetic field for cancer tissue ablation", Elsevier BV, (2024), Vol 95, No : 112561
- "Computational modeling of the rectangular non-aligned multi-injector for efficient fuel mixing in a supersonic combustion chamber", Springer Science and Business Media LLC, (2024), Vol 14, No 1:
- "Numerical exploration of the impact of fluid type in a uniquely designed shell and spiral tube heat exchanger", Elsevier BV, (2024), Vol , No : 104798
- "Fuel mixing and diffusion behind the unswept ramp injector with lobed nozzle at combustor of scramjet engine", Elsevier BV, (2024), Vol , No : 133089
- "Numerical exploration of the impact of fluid type in a uniquely designed shell and spiral tube heat exchanger", Elsevier BV, (2024), Vol 61, No : 104798
- "An Innovative Energy Storage System Based on Phase Change Material and Solar Energy Integrated With an Air Handling Unit to Produce Heating and Cooling", Wiley, (2024), Vol 6, No 6:
- "A numerical investigation of heat transfer and clogging in smooth and ribbed cooling channels of the GEF9’s first rotor blade", Elsevier BV, (2024), Vol , No : 103368
- "Energy and exergy analysis of a modified air handling unit assisted by phase change material, heat recovery unit, and solar energy", Springer Science and Business Media LLC, (2024), Vol 14, No 1:
- "Investigating the effect of cold fluid flow direction used in the outer tube on heat transfer and hot fluid pressure drop in the inner tube by numerical method", Elsevier BV, (2025), Vol 119, No : 201-210
- "Numerical Study of Thermal Protection for Healthy Tissue Using Phase Change Materials in Microwave Ablation with Coaxial Slot Antennas", Elsevier BV, (2025), Vol , No : 104473
- "Enhancing Wind Energy Efficiency: A Study on the Power Output of Shrouded Wind Turbines for a Hydrogen Storage System", Elsevier BV, (2025), Vol , No : 104710
- "Enhanced thermal performance of cylindrical energy storage tanks with radial and longitudinal fins using phase change materials: A comparative numerical study", Elsevier BV, (2025), Vol 26, No : 105081
- "A numerical investigation of heat transfer and clogging in smooth and ribbed cooling channels of the GEF9’s first rotor blade", Elsevier BV, (2025), Vol 26, No : 103368
Conference Papers
- SiO۲-Al۲O۳-water hybrid nanofluid for li-ion energy storage system cooling ارائه شده در The 32nd annual international conference of the Iranian Society of Mechanical Engineers (1403)
- تحلیل انرژی سیستم ژنراتور ترموالکتریک برای نانوسیال (Fe(۳)O(۴ به عنوان لایه ی پوششی: بررسی کارایی و عملکرد ارائه شده در The 32nd annual international conference of the Iranian Society of Mechanical Engineers (1403)
- Numerical Analysis of Cavitation in a Centrifugal Pump Considering the Impact of Inducer and Fluid Viscosity ارائه شده در The 32nd annual international conference of the Iranian Society of Mechanical Engineers (1403)
- آنالیز فنی - اقتصادی و بهینه سازی سیستم های تولید همزمان CHP با آب شیرین کن ارائه شده در The 32nd annual international conference of the Iranian Society of Mechanical Engineers (1403)
- Exergy And Energy Analysis Of Pulse Tube Systems ارائه شده در 6th International Conference on Science, Engineering, and role of Technology in new Businesses (1403)
- Energy and Exergy Analysis of Modified Kalina Cycle for Cogeneration of Cooling, Heating and Power ارائه شده در 16th International Conference on Mechanical, Construction Industrial & Civil Engineering (1403)
- Analysis Of The Eddy Flow Resulting From DifferentReynolds Inside The Edged Channel ارائه شده در 19th International Conference on Innovation and Research in Engineering Sciences (ICIRES) (1403)
- Evaluation of CCHP system with CO۲ working fluid in hot weather conditions ارائه شده در 8th International Conference on Applied Researches in Science & Engineering (1403)
- Optimization of refrigeration process in a cold storage using ANSYS Fluent Simulation ارائه شده در 8th International Conference on Applied Researches in Science & Engineering (1403)
- Numerical Modeling of Forced Convection in Electrical Heater ارائه شده در 8th International Conference on Applied Researches in Science & Engineering (1403)
- Thermodynamic analyses of near zero CO۲ emission oxy-fuel power plant with atmospheric condensation unit ارائه شده در 3rd International Conference on Recent Advances in Engineering, Innovation and Technology (1403)
- Numerical Study of Boiling Flow of Aluminum Oxide ارائه شده در The first international conference on electricity, mechanics, information technology and computers in engineering sciences (1403)
- تحلیل و بررسی کیفیت آب مصرفی نیروگاه حرارتی تبریز ارائه شده در The 31st annual conference between Iran Mechanical Engineering and the 9th Iran Power Plant Industry Conference (1402)
- مشکلات نیروگاه حرارتی تبریز و عوارض نامطلوب وضعیت فعلی المانهای حرارتی ارائه شده در The 31st annual conference between Iran Mechanical Engineering and the 9th Iran Power Plant Industry Conference (1402)
- Designing a Connecting Rod for an Internal Combustion Engine ارائه شده در The 7th International Conference on Applied Research in Science and Engineeringg (1402)
- Ackerman steering mechanism design for front axlesteering vehicles ارائه شده در The 7th International Conference on Applied Research in Science and Engineeringg (1402)
- Effect of cool and green roofs on the thermal comfort, energy savings and carbon emissions under dry desert climate ارائه شده در 8th Clean Energy Conference (1402)
- Numerical Analysis of Aquatic Creature movement in water ارائه شده در The second international conference on recent developments in engineering, innovation and technology (1402)
- CFD Simulation of Flow in a Centrifugal Pump ارائه شده در The second international conference on recent developments in engineering, innovation and technology (1402)
- Design and optimization of a multigeneration energy system for generating power, heating, cooling and fresh water as demands of a residential scheme ارائه شده در The third international conference on new researches and achievements in science, engineering and new technologies (1402)
- Analysis of the Bus Chassis with Finite Element Method through MATLAB and Abaqus Software ارائه شده در 8th.International Conference on Researches in Science & Engineering & 5th.International Congress on Civil, Architecture and Urbanism in Asia (1402)
- Wankel Engine Modeling and Comparison with a Conventional Internal Combustion Engine ارائه شده در The ninth international Conference on Knowledge and Technology of Mechanical, Electrical Engineering and Computer Of Iran (1402)
- Simulation of the impact of adding airfoils to wind turbines on output power ارائه شده در 5th International Conference on Engineering, Technology and Applied (1402)
- The Simulation of Car Impact at Different Speeds by Abaqus and ANSYS Software, Study the Results, and Development of an Appropriate Analytical Relationship ارائه شده در The 12th international conference on recent developments in management and industrial engineering (1401)
- بررسی و شبیه سازی نفوذ قطره دو بعدی (کاربرد روش حجم سیال) ارائه شده در The 12th international conference on recent developments in management and industrial engineering (1401)
- شبیه سازی برخورد خودرو در چند سرعت مختلف در آباکوس وانسیس و بررسی نتایج بدنه وشاسی به کمک نرم افزار متلب ارائه شده در 23rd International conference on Recent Research in Science and Technology (1401)
- بررسی تست ایمنی خودروی ۲۰۶ در سرعت های مختلف به کمک نرم افزارAnsys ارائه شده در 23rd International conference on Recent Research in Science and Technology (1401)
- بررسی تولید هیدروژن به روش های سیکل ترموشیمیایی وانادیوم کلر-مس کلر و مقایسه آن ها ارائه شده در The first international congress of science, engineering and new technologies (1401)
- شبیه سازی برخورد خودرو BMW سر ی ۲۰ و بررسی نتایج بدنه و شاسی به کمک نرم افزار کتیا ارائه شده در The first international congress of science, engineering and new technologies (1401)
- انواع انرژی خورشیدی مورد استفاده در سطح ملی و جهانی ارائه شده در 11th International Engineering Conference on Advanced Research in Science and Technology (1401)
- Attitude control of a satellite using classical control methods ارائه شده در 11th International Engineering Conference on Advanced Research in Science and Technology (1401)
- آنالیز و تجزیه و تحلیل المان محدود استخوان فمور انسان ارائه شده در The first conference of electricity, mechanics, aerospace, computer and engineering sciences (1401)
- مطالعه و تحلیل آیرودینامیک بدن خفاش و عقاب در حالت پرواز پایا ارائه شده در The 13th International Conference on Mechanics, Industries and Civil Engineering (1401)
- Hydropower plants and collecting and classifyinginformation related to energy extraction from water(tides-waves-OTEC) ارائه شده در 7th.International Conference on Researches in Science & Engineering & 4th.International Congress on Civil, Architecture and Urbanism in Asia (1401)
- Using differential transmission to solve the problem of signal leakage in capacitive coupling communication in metal cabinet ارائه شده در The 13th recent international engineering conference in management and industries (1401)
- Providing The Power demands of an administrative organization by a SOFC with OFMSW (2022)
- Use of Solar Energy To Produce Hydrogen Fuel (2022)
- RESEARCH ON THE TYPES OF HYDROELECTRIC POWER TURBINES (2022)
Journal Papers
- Proposing a Hydrogen Liquefaction Cycle for Geothermal Energy Storage in an Innovative Multi-Generation System منتشر شده در Iranian Journal of Hydrogen & Fuel (1404)
- مدل سازی و بهینه سازی سیستم های انرژی هیبریدی با استفاده از شاخص های فنی-اقتصادی و زیست محیطی منتشر شده در KARAFAN (1403)
- Analysis of the effect of coating the piston crown with ceramic material on the mechanical behavior of four-cylinder diesel engine components using the finite element method منتشر شده در Energy Equipment and Systems (1403)
- طراحی و بهینه سازی سیستم های خنک کننده برای تراشه های با توان بالا منتشر شده در Studies of Applied Sciences in Engineering (1403)
- پیش بینی و مدل سازی رفتار نفوذ و پیمایش قطره مایع داخل محیط متخلخل با استفاده از روش جریان دو فازی حجم سیال منتشر شده در Scientific journal “Science and Technology in Mechanical Engineering (1402)
- مطالعه عددی برخورد اتومبیل در سرعت های مختلف به منظور یافتن رابطه تحلیلی مناسب منتشر شده در JOURNAL OF MECHANICAL ENGINEERING (1402)
Books
- کتاب Digital Health and Wearable Technologies (Kindle; 1st Edition (June 22, 2024)) - 2024 - English
- کتاب مقدمه ای بر هیدروژن و پیل های سوختی (جهاد دانشگاهی) - 1404 - Persian
- کتاب دانشنامه انرژی های تجدیدپذیر: جلد اول نیروگاه های بادی (جهاد دانشگاهی) - 1404 - Persian
- کتاب سیستم های ذخیره سازی انرژی گرمایی با تاکید بر لوله های گرمایی (انتشارات دانشگاه صنعتی ارومیه) - 1404 - Persian
- کتاب طراحی و تحلیل سیستم های حرارتی (انتشارات دانشگاه صنعتی اراک) - 1403 - Persian
- کتاب پتروشیمی-جلد 1 تجهیزات (انتشارات چاپ و نشر ایران) - 1403 - Persian
- کتاب اصول کارآفرینی در عصر چهارم صنعت (انتشارات مهر وطن) - 1403 - Persian
- کتاب انرژی تجدیدپذیر و فناوری سبز (انتشارات دانشگاه صنعتی اراک) - 1402 - Persian
- پایان نامه تاثیر پوشش آیرودینامیکی در توان توربین بادی (دانشگاه تبریز) - 1402 - Persian
- کتاب نیروگاه حرارتی تبریز (انتشارات چاپ و نشر) - 1401 - Persian
- کتاب توربین بادی هوشمند (انتشارات انتخاب) - 1401 - Persian
- کتاب مقدمه ای بر توربین های بادی (انتشارات آرنا) - 1401 - Persian
- کتاب آشنایی با سیالات (انتشارات انتخاب) - 1401 - Persian
- کتاب میکروپمپ ها (انتشارات چاپ و نشر) - 1401 - Persian
Teaching Experience
- عضو هیات علمی University of Tabriz(1399-1403)
Education
- دکتری تخصصی مهندسی مکانیک-گرایش تبدیل انرژی University of Tabriz1403-تاکنون
- کارشناسی ارشد مهندسى مكانيك-تبديل انرژى University of Tabriz1401-1402
- کارشناسی مهندسى مكانيك دانشگاه تبريز 1397-1401
سوابق شغلی و تخصصی
- سابقه تدریس در مدرس حل تمرین درس طراحی اجزا ماشین 1 و 2 (1399-1402)
- سابقه تدریس در مدرس حل تمرین درس نیروگاه ها (1401-1401)
- سابقه تدریس در مدرس حل تمرین درس مقاومت مصالح 1 و 2 (1399-1401)
- سابقه تدریس در مدرس حل تمرین درس مبدل های حرارتی (1401-1402)
- سابقه تدریس در مدرس حل تمرین درس انتقال حرارت 1 (1401-1402)
- سابقه تدریس در مدرس حل تمرين درس ریاضی مهندسی پيشرفته (1402-1402)
- سابقه کار صنعتی در کارآموز در نیروگاه حرارتی تبریز (1400-1400)
- سابقه کار صنعتی در کارشناس تاسیسات در پروژه تهويه مترو تبریز در شرکت سابیر بین الملل (1402-1403)
- سابقه کار صنعتی در عضو بخش تحقیق و توسعه شرکت نورد کاران فولاد غرب آذر ناب خاوری (1403-تاکنون)
جوایز و افتخارات
- پذیرش بدون آزمون استعدادهای درخشان دانشگاه تبریز در مقطع دکتری رشته مهندسی مکانیک گرایش تبدیل انرژی (1403)
- دانشجوی سرآمد دانشگاه تبریز در بخش دانشگاهی،آموزشی،فرهنگی و پژوهشی (1403)
- عضو سازمان استعدادهای درخشان دانشگاه تبریز در مقطع دکتری به لحاظ سوابق پژوهشی و رتبه اول در بین دانشجویان هم رشته و هم ورودی و مشمول جوایز بنیاد نخبگان (1403)
- مشمول جوایز بنیاد نخبگان طرح وزوایی (1403)
- رنك 1 بين دانشجویان مهندسی مکانیک-تبدیل انرژی دوره دکتری دانشگاه تبريز (1403)
- رنك 1 بين دانشجویان مهندسی مکانیک-تبدیل انرژی دوره ارشد دانشگاه تبريز (1402)
- عضو سازمان استعداد های درخشان دانشگاه تبریز در مقطع ارشد به لحاظ سوابق پژوهشی و رتبه اول در بین دانشجویان هم رشته و هم ورودی (1402)
- دانشجوی نمونه دانشگاه تبریز در بخش فنی و مهندسی (1402)
- پذیرش بدون آزمون استعدادهای درخشان دانشگاه تبریز در مقطع ارشد رشته مهندسی مکانیک گرایش تبدیل انرژی (1401)
- رنك 4 بين 80 نفر ورودى مهندسى مكانيك دانشگاه تبريز (1397)
- پذیرش بدون آزمون استعدادهای درخشان دانشگاه علم و صنعت ایران رشته مهندسی مکانیک گرایش آیرودینامیک
Workshops
- Research and Development(R&D) Management - IRAN (2025)
- Training Course on Practical Skills in editing and Publishing ISI Articles - Alzahra University (2022)
- Solar PowerPlant Design Training Course - Amirkabir University of Technology (2021)
- Article Writing Workshop - Scientific Association of Mechatronic of Shahid Beheshti University (2021)
- Technics of Scientific Paper Writing - Pars Pajouhaan (2021)
- Python Programming - Ati Pazhohesh Amirkabir Company (2021)
- Linkdin Training - Shahid Beheshti University (2021)
- دوره پمپ و كمپرسور - موسسه فلات قاره (1400)
- EES - دانشگاه شهیدبهشتی (1400)