Tohid was born in Iran. He did his Bachelors, Masters, and Ph.D. in Mechanical Engineering at the University of Guilan. He was a visiting research scholar at the Swinburne University of Technology under the supervision of Prof. Guoxing Lu and Prof. Dong Ruan. He is currently an Assistant Professor in Mechanical Engineering at EYC. His research interest is Impact Mechanics. He specifically works on the behavior of metallic structures under large dynamic loads.
سمتهای علمی و اجرایی در دانشگاهها و مراکز علمی کشور
سمتهای علمی و اجرایی در کنفرانس ها و نشستهای معتبر ایران
ISI Papers
- "Experimental investigation and analytical modelling for forming of circular-clamped plates by using gases mixture detonation", SAGE Publications, (2015), Vol 234, No 5: 1102-1111
- "Study on the response of circular thin plate under low velocity impact", Techno-Press, (2015), Vol 9, No 2: 207-218
- "Tracking the explosion characteristics of the hydrogen-air mixture near a concrete barrier wall using CESE IBM FSI solver in LS-DYNA incorporating the reduced chemical kinetic model", Elsevier BV, (2023), Vol 172, No : 104401
- "Effect of gas detonation on response of circular plate-experimental and theoretical", Techno-Press, (2015), Vol 56, No 4: 535-548
- "A non-dimensional analysis on the large plastic deformation triangular plates under impulsive loading", Springer Science and Business Media LLC, (2022), Vol 45, No 1:
- "Calibration of different constitutive material models for Vosges sandstone due to its application in rock-cutting processes", Springer Science and Business Media LLC, (2022), Vol 44, No 10:
- "Multi-objective optimum design of ANFIS for modelling and prediction of deformation of thin plates subjected to hydrodynamic impact loading", SAGE Publications, (2016), Vol 234, No 3: 368-378
- "Modeling and prediction of fatigue life in composite materials by using singular value decomposition method", SAGE Publications, (2016), Vol 234, No 2: 246-254
- "A simple method for geometric modelling of biological structures using image processing technique", SciTech Solutions, (2016), Vol 23, No 5: 2194-2202
- "Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates", Elsevier BV, (2016), Vol 109, No : 367-376
- "Experimental and analytical investigation into large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile", Elsevier BV, (2016), Vol 107, No : 257-265
- "Numerical simulation of the influence of confined multi-point ignited H2–O2 mixture on the propagation of shock waves towards a deformable plate", Elsevier BV, (2022), Vol 47, No 63: 27080-27095
- "Empirical Modelling for Prediction of Large Deformation of Clamped Circular Plates in Gas Detonation Forming Process", Springer Science and Business Media LLC, (2016), Vol 40, No 6: 1485-1494
- "Repeated uniform blast loading on welded mild steel rectangular plates", Elsevier BV, (2022), Vol 178, No : 109523
- "Dynamic compaction of cold die Aluminum powders", Techno-Press, (2016), Vol 10, No 1: 109-124
- "Dynamic response of thin triangular plates under gaseous detonation loading", Elsevier BV, (2022), Vol 31, No : 103423
- "A comparative study of the effects of constructional elements on the mechanical behaviour of dragonfly wings", Springer Science and Business Media LLC, (2015), Vol 122, No 1:
- "Dynamic response of thin triangular plates under gaseous detonation loading", Elsevier BV, (2022), Vol 31, No : 103423
- "The influence of gas mixture detonation loads on large plastic deformation of thin quadrangular plates: Experimental investigation and empirical modelling", Elsevier BV, (2017), Vol 118, No : 1-11
- "3D numerical investigation of the detonation wave propagation influence on the triangular plate deformation using finite rate chemistry model of LS-DYNA CESE method", Elsevier BV, (2022), Vol 161, No : 104108
- "On dimensionless numbers for the dynamic plastic response of quadrangular mild steel plates subjected to localized and uniform impulsive loading", SAGE Publications, (2016), Vol 231, No 5: 939-950
- "Mechanical and thermomechanical mesoscale analysis of multiple surface cracks in ceramic coatings based on the DEM-FEM coupling method", Elsevier BV, (2022), Vol 236-237, No : 111336
- "2D numerical study on the deflection of thin steel plate subjected to gaseous detonation wave interaction", Elsevier BV, (2021), Vol 46, No 73: 36348-36368
- "On dimensionless numbers for predicting large ductile transverse deformation of monolithic and multi-layered metallic square targets struck normally by rigid spherical projectile", Elsevier BV, (2017), Vol 112, No : 118-124
- "An experimental investigation into the quasi-static compression behavior of open-cell aluminum foams focusing on controlling the space holder particle size", Elsevier BV, (2021), Vol 70, No : 193-204
- "Gas mixture detonation method, a novel processing technique for metal powder compaction: Experimental investigation and empirical modeling", Elsevier BV, (2017), Vol 315, No : 171-181
- "Experimental investigation and dimensionless analysis of forming of rectangular plates subjected to hydrodynamic loading", Pleiades Publishing Ltd, (2017), Vol 58, No 1: 139-147
- "Impact spot welding of Al/Cu dissimilar metals using gas mixture detonation technique: An experimental investigation and finite element simulation", Elsevier BV, (2021), Vol 65, No : 455-470
- "Experimental and theoretical study of large deformation of rectangular plates subjected to water hammer shock loading", SAGE Publications, (2015), Vol 231, No 3: 490-496
- "An experimental and numerical investigation on impact spot welding of metallic plates using gas mixture detonation technique", SAGE Publications, (2020), Vol 235, No 4: 917-933
- "Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform and localized impulsive loading", Elsevier BV, (2018), Vol 123, No : 48-56
- "Modeling and prediction of metallic powder behavior in explosive compaction process by using genetic programming method based on dimensionless numbers", SAGE Publications, (2018), Vol 233, No 2: 195-201
- "Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load", Elsevier BV, (2019), Vol 125, No : 93-106
- "Gas mixture detonation load on polyurea-coated aluminum plates", Elsevier BV, (2020), Vol 155, No : 106851
- "3D numerical simulation of the gas detonation forming of aluminum tubes considering fluid-structure interaction and chemical kinetic model", Elsevier BV, (2021), Vol 161, No : 107469
- "Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: An experimental study", Elsevier BV, (2020), Vol 157, No : 107024
- "Structural response of monolithic and multi-layered circular metallic plates under repeated uniformly distributed impulsive loading: An experimental study", Elsevier BV, (2020), Vol 157, No : 107024
- "Gas mixture detonation load on polyurea-coated aluminum plates", Elsevier BV, (2020), Vol 155, No : 106851
- "3D numerical simulation of the gas detonation forming of aluminum tubes considering fluid-structure interaction and chemical kinetic model", Elsevier BV, (2021), Vol 161, No : 107469
- "Repeated localized impulsive loading on monolithic and multi-layered metallic plates", Elsevier BV, (2019), Vol 144, No : 106332
- "Impact spot welding of Al/Cu dissimilar metals using gas mixture detonation technique: An experimental investigation and finite element simulation", Elsevier BV, (2021), Vol 65, No : 455-470
- "Calibration of different constitutive material models for Vosges sandstone due to its application in rock-cutting processes", Springer Science and Business Media LLC, (2022), Vol 44, No 10:
- "New dimensionless numbers for deformation of circular mild steel plates with large strains as a result of localized and uniform impulsive loading", SAGE Publications, (2016), Vol 234, No 2: 231-245
- "Modeling and prediction of fatigue life in composite materials by using singular value decomposition method", SAGE Publications, (2016), Vol 234, No 2: 246-254
- "Multi-objective optimum design of ANFIS for modelling and prediction of deformation of thin plates subjected to hydrodynamic impact loading", SAGE Publications, (2016), Vol 234, No 3: 368-378
- "Experimental investigation and analytical modelling for forming of circular-clamped plates by using gases mixture detonation", SAGE Publications, (2015), Vol 234, No 5: 1102-1111
- "Large transverse deformation of double-layered rectangular plates subjected to gas mixture detonation load", Elsevier BV, (2019), Vol 125, No : 93-106
- "Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading", SAGE Publications, (2018), Vol 233, No 7: 1449-1471
- "Modeling and prediction of metallic powder behavior in explosive compaction process by using genetic programming method based on dimensionless numbers", SAGE Publications, (2018), Vol 233, No 2: 195-201
- "Closed-form analytical analysis on the effect of coupled membrane and bending strains on the dynamic plastic behaviour of fully clamped thin quadrangular plates due to uniform and localized impulsive loading", Elsevier BV, (2018), Vol 123, No : 48-56
- "Experimental and theoretical study on large ductile transverse deformations of rectangular plates subjected to shock load due to gas mixture detonation", Wiley, (2017), Vol 53, No 4:
Conference Papers
- شبیه سازی عددی صدمه وارد شده به پک باتری های لیتیوم-یون در خودروهای الکتریکی ناشی از بار ضربه ای ارائه شده در 1st International & 2nd National Lithium Battery Conference (1403)
- پیش بینی پاسخ ورق های فلزی دایروی تحت بار انفجاری یکنواخت با استفاده از یادگیری عمیق ارائه شده در The 10th National Defense Science and Engineering Conference with the approach of dealing with new defense threats (1402)
- پیش بینی بیشترین تغییرشکل عرضی ورق مدور تحت بارگذاری انفجاری ارائه شده در Second National Conference on Soft Computing and Cognitive Sciences (1402)
- مطالعهای بر پاسخ دینامیکی ساختارهای فلزی تحت نفوذ پرتابه صلب: مدلسازی و بهینه سازی ارائه شده در The 5th International Conference on Electrical,computer and mechanical engineering (1399)
Journal Papers
- استفاده از روش کوپل اویلری-لاگرانژی در تحلیل فرآیند شکل دهی سرعت بالای ورق های فلزی با قالب مادگی منتشر شده در Aerospace Mechanics (1404)
- پیش بینی پاسخ پلاستیک ورق های فلزی دایره ای تحت بار دینامیکی یکنواخت با استفاده از شبکه عصبی عمیق منتشر شده در Aerospace Mechanics (1403)
- شکل دهی با قالب مادگی ورق های فلزی با استفاده از انفجار مکرر زیرآب منتشر شده در Aerospace Mechanics (1403)
- شبیه سازی عددی پروفیل تغییرشکل ورق مثلثی تحت انفجار مخلوط گازی منتشر شده در Aerospace Mechanics (1402)
- بررسی تجربی و عددی پنل های ساندویچی با هسته موجدار ذوزنقه ای شکل، تحت بارگذاری انفجاری مایل منتشر شده در Aerospace Mechanics (1402)
- تغییر شکل پلاستیک ورق های چندلایه فلزی هم جنس و غیر هم جنس با چگالی سطحی ثابت تحت بارگذاری دفعی مکرر منتشر شده در Aerospace Mechanics (1401)
- بارگذاری انفجاری مکرر روی ورق های مستطیلی تقویت شده با خط جوش: بررسی تجربی و مدلسازی با شبکه عصبی GMDH منتشر شده در Aerospace Mechanics (1401)
- مدل سازی تحلیلی تغییر شکل ورق مثلثی تحت انفجار مخلوط گازها منتشر شده در Aerospace Mechanics (1401)
- بهینه سازی پارامترهای موثر در فرآیند شکل دهی آزاد ورق آهنی با روش انفجار زیرآب منتشر شده در Aerospace Mechanics (1401)
- ارائه یک مدل تحلیلی مبتنی بر روش انرژی برای بررسی تغییرشکل پلاستیک ورق های دایره ای تحت بار انفجار مکرر با توزیع یکنواخت منتشر شده در Journal of Solid and Fluid Mechanics (1401)
- پیش بینی جابجایی مرکز جرم ورق مثلثی با استفاده از آنالیز ابعادی منتشر شده در Aerospace Mechanics (1401)
- مطالعه تجربی تغییر شکل بزرگ پلاستیک ورق های دایره ای تک و چندلایه آلومینیومی در برابر بارگذاری دفعی یکنواخت مکرر منتشر شده در Journal of Solid and Fluid Mechanics (1400)
- بررسی تجربی و تحلیل رگرسیونی شکل دهی آزاد و با قالب ورق های فلزی دایره ای با انفجار مخلوط گاز منتشر شده در Aerospace Mechanics (1400)
- بررسی اثر فاصله استقرار خرج انفجاری روی تغییر شکل ورق های فلزی دایروی منتشر شده در Journal of Solid and Fluid Mechanics (1400)
- پاسخ دینامیکی سپر انفجاری ساندویچی مدور با هسته لوله ای تحت بار انفجار آزاد منتشر شده در Journal of Solid and Fluid Mechanics (1400)
- پاسخ تجربی و تحلیلی ورق های ساندویچی مدور فلزی با هسته لوله ای تحت بار انفجار منتشر شده در Aerospace Mechanics (1400)
- بررسی تجربی رفتار ساختارهای الیاف-فلز حاوی نانو ذرات تحت ضربه سرعت پایین مکرر منتشر شده در Journal of Solid and Fluid Mechanics (1400)
- بررسی تجربی مودهای تغییر شکل و مکانیسم شکست ورق های چهارگوش جوش شده تحت بارگذاری انفجاری مکرر منتشر شده در Modares Mechanical Engineering (1400)
- شبیه سازی عددی دوبعدی تغییر شکل غیرخطی ورق نازک تحت نیروی متقارن محوری انفجار مخلوط گازی منتشر شده در Modares Mechanical Engineering (1400)
- پاسخ دینامیکی ورق های ساندویچی مدور فلزی با هسته لوله ای تحت بار انفجار منتشر شده در Modares Mechanical Engineering (1400)
- بررسی تغییر شکل پلاستیک ساختارهای ساندویچی با رویه های آلومینیومی و هسته پوکه معدنی تحت بارگذاری ضربه ای سرعت پایین منتشر شده در Modares Mechanical Engineering (1400)
- High-Velocity Compaction of Aluminum Powder by Gas Detonation Forming Technique منتشر شده در International Journal of Advanced Design and Manufacturing Technology (1399)
- پاسخ ورق های فلزی تقویت شده با روکش پلیمر تحت ضربه پرتابه با سرعت بالا به روش اجزاء محدود و ارائه مدلی بر اساس رگرسیون تکاملی منتشر شده در Journal of Solid and Fluid Mechanics (1399)
- رفتار ورقهای چهارگوش تحت بار دفعی: تحلیل ابعادی منتشر شده در Aerospace Mechanics (1399)
- مطالعهای بر پاسخ پلاستیک ورقهای دایرهای تحت بار دینامیکی با توزیع یکنواخت و محلی منتشر شده در Journal of Solid and Fluid Mechanics (1399)
- ارائه مدل شبکهی عصبی GMDH برای پیشبینی رفتار ورقهای مثلثی تحت بارگذاری هیدرودینامیکی منتشر شده در Journal of Solid and Fluid Mechanics (1399)
- مطالعهای بر عملکرد بالستیکی ساختارهای تکلایه و چندلایه فلزی تحت ضربه پرتابه کروی صلب: بررسی تجربی و مدلسازی منتشر شده در Journal of Solid and Fluid Mechanics (1399)
- مطالعه تجربی و بهینه سازی پاسخ دینامیکی ورق های فلز- پلیمر تحت بار ضربه ای با استفاده از روش سطح پاسخ منتشر شده در Modares Mechanical Engineering (1399)
- پاسخ دینامیکی پودرهای فلزی تحت بارگذاری ضربه ای سرعت پایین: مطالعه تجربی و بهینه سازی با روش سطح پاسخ منتشر شده در Modares Mechanical Engineering (1399)
- پاسخ ضربه سرعت پایین ورق با هندسه های مختلف تحت بار هیدرودینامیکی: مطالعه تجربی و بهینه سازی فرآیند با روش سطح پاسخ منتشر شده در Modares Mechanical Engineering (1399)
- شکل دهی آزاد و با قالب ورق های فلزی دایره ای با انفجار مخلوط گازهای اکسیژن و استیلن: بررسی تجربی منتشر شده در Modares Mechanical Engineering (1399)
- اثر بار دینامیکی شدید روی تغییر شکل پلاستیک ورق های چهارگوش: مطالعه تجربی، تحلیل رگرسیونی و بهینه سازی چندهدفه منتشر شده در Modares Mechanical Engineering (1399)
- بررسی تاثیر شکل هندسی دماغه پرتابه بر جوش کاری نقطه ای ورق های فولادی با روش انفجار مخلوط گازها منتشر شده در Modares Mechanical Engineering (1399)
- بررسی تجربی پاسخ دینامیکی ورق های دو لایه چهارگوش فلزی تحت بارگذاری دفعی غیریکنواخت منتشر شده در Modares Mechanical Engineering (1399)
- رفتار ورق های تک لایه و چندلایه آلومینیومی تحت چندین بارگذاری دفعی یکنواخت: مطالعه تجربی و مدل سازی شبکه عصبی منتشر شده در Modares Mechanical Engineering (1399)
- جوشکاری نقطه ای ورق های فولادی با روش انفجار مخلوط گازها: مطالعه تجربی منتشر شده در Modares Mechanical Engineering (1399)
- اثر بارگذاری انفجاری یکنواخت و محلی روی پاسخ ورق های تک لایه دایره ای: مطالعه تجربی و تحلیل رگرسیونی با استفاده از روش رویه پاسخ منتشر شده در Modares Mechanical Engineering (1399)
- تغییرشکل پلاستیک ورق های آلومینیومی با روکش پلیمری تحت بارگذاری انفجار مخلوط گازها: بخش اول: مطالعات تجربی منتشر شده در Journal of Solid and Fluid Mechanics (1398)
- تغییرشکل پلاستیک ورق های آلومینیومی با روکش پلیمری تحت بارگذاری انفجار مخلوط گازها: بخش دوم: مدل سازی تحلیلی و تجربی منتشر شده در Journal of Solid and Fluid Mechanics (1398)
- بررسی تجربی فرآیند جوشکاری نقطه ای در اهداف فلزی تحت ضربه با پرتابه های مسطح و مخروطی منتشر شده در Journal of Solid and Fluid Mechanics (1398)
- بررسی تجربی و تحلیل بهینه فرآیند شکل دهی سرعت بالا ورق های دولایه منتشر شده در Journal of Solid and Fluid Mechanics (1398)
- اثر کرنش های خمشی و غشایی کوپل شده بر تغییر شکل بزرگ پلاستیک ورق های مستطیلی تحت بارگذاری ضربه ای منتشر شده در JOURNAL OF MECHANICAL ENGINEERING (1398)