Preparation of Cubic/Tetragonal Composite Electrolytes Through Stabilizer Coating Method Using Zirconia Polymeric Solution
Publish place: 2nd International Conference on Composites: Characterization, Fabrication and Application
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,384
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT02_075
تاریخ نمایه سازی: 24 مهر 1389
Abstract:
In this study cubic/tetragonal zirconia based composite electrolytes were prepared by stabilizer coating method. At first zirconia solution was coated over pure 8YSZ(8 mol% yttria stabilized zirconia) powders. The resulting powders then were formed into cylindrical specimens and sintered at various temperatures. Microstructure and phase content of samples were characterized by SEM and XRD techniques. The electrical conductivity of composite samples was studied by electrochemical impedance spectroscopy. In addition hardness and toughness of samples were measured by Vickers microhardness indentation method. It was found that increasing tetragonal phase content of samples improves both mechanical and electrical properties of composite samples at low temperatures. In addition by this method highly uniform distribution of phase can be obtained
Keywords:
Authors
M Ghatee
Assistant Professor, Faculty of Mechanical Engineering, Shahrood University of Technology
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :