Creep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
Publish place: 2nd International Conference on Composites: Characterization, Fabrication and Application
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,119
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT02_147
تاریخ نمایه سازی: 24 مهر 1389
Abstract:
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each other. No creep rupture failures were observed in short-term (less than 10000 seconds) high temperature (T= 150 and 200 °C) tensile creep tests at the loads up to 15% of the ultimate tensile strength (UTS) of the specimen. It was also found that the creep resistance of basalt fiber reinforced epoxy (BFRE) was higher than that of glass fiber reinforced epoxy (GFRE) and the materials are generally behaved as non-linear for all stresses and temperatures. Adding MGP decreased the initial strain of BFRE, but had no significant effect on the overall life time of BFRE.
Keywords:
Authors
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :