Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels
Publish place: International Journal of Advanced Design and Manufacturing Technology، Vol: 13، Issue: 2
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 280
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-13-2_006
تاریخ نمایه سازی: 23 تیر 1399
Abstract:
In the present work dissimilar joints of AISI 202 and AISI 316steels are produced using Metal Inert Gas (MIG) welding. Welding current, wire feed rate, flow rate of gas and edge included angle are considered as input parameters and tensile strength, Impact strength and Maximum bending load are considered as output responses. Response Surface Method (RSM) is adopted using Central Composite Design (CCD) and 31 experiments were performed for 4 factors and 5 levels. Analysis of Variance (ANOVA) is carried out at 95% confidence level and coefficient of determination (R2) of 0.94 is obtained for all the output responses. Effect of welding parameters on output responses are studied by drawing main effect plots. Dominating parameters are identified using contour plots and surface plots are drawn to find the optimal solution. Optimal weld parameters are identified using Response optimizer.
Keywords:
Authors
Venkatratnam Dirisala
Department of Mechanical Engineering, Sri Mittapalli College of Engineering, Guntur, India
KESAVA RAO V.V.S
Department of Mechanical Engineering, Andhra University, Visakhapatnam, India
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :