تهیه کاتالیزور زیگلر - ناتا پایه نانوسیلیکا به منظور پلیمریزاسیون پیل اتیلن
Publish place: 1st National Conference on Nano Science and Technology
Publish Year: 1389
نوع سند: مقاله کنفرانسی
زبان: Persian
View: 1,744
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NNTC01_308
تاریخ نمایه سازی: 8 آبان 1389
Abstract:
Nanosilica was prepared by precipitation method and was characterized by various analytical tools.From transmission electron micrographthe silica particles are found to have almost spherical shape.The surface area is found to be of 271 m2 g−1 anddensity 2.2 g cm−3.The MgCl2/SiO2 hybrid support was prepared by recrystallization method. Slurry polymerization of ethylene was carried out using the catalyst in dry hexane, while; TEA was used as cocatalyst.The cocatalysts effects, such as cocatalyst/catalyst molar ratio, H2 concentration, polymerization temperature and monomer pressure on activity of the catalyst were investigated. Ti concentra,on in solid catalyst was 0.95% wt. Structural study was carried out using FTIR, SEM, XRF,GPC and BET techniques. It was found that the polydispersity index of polyethylene could be adjusted over a wide range of 2-15 through regula,ng the [Mg]/[Si] ratio and polymerization temperature, and especially when the [Mg]/[Si] ratio was unity, the polydispersity index could be reached over 14.
Keywords:
Authors
امیر روحی صفت
تهران دانشگاه صنعتی امیرکبیر دانشکده مهندسی پلیمر
سعید پورمهدیان
تهران دانشگاه صنعتی امیرکبیر دانشکده مهندسی پلیمر
محمد وطن خواه
تهران دانشگاه صنعتی امیرکبیر دانشکده مهندسی پلیمر
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :