Experimental Study on Warm Incremental Tube Forming of AA۶۰۶۳ Aluminum Tubes
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 281
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-33-9_011
تاریخ نمایه سازی: 6 اردیبهشت 1400
Abstract:
Effect of temperature on formability of AA۶۰۶۳ aluminum tubes in incremental forming process was investigated. Experiments are performed on AA۶۰۶۳ aluminum tubes. A spirally moving tool incrementally expands the tube wall. The tube is clamped from both ends while the deformation zone is not in contact with the die. A circumferential heating system is used to heat the tube due to the low formability of aluminum alloys at ambient temperature. The effects of process parameters including temperature, radial feed, axial feed and tool linear velocity are investigated in order to obtain the highest formability and surface quality. The results show that with a temperature rise from ۱۰۰°C to ۳۰۰°C, the expansion ratio increases from ۲۸% to ۳۴%. Axial feeding and temperature are the most effective parameters on the surface roughness and bulge diameter, respectively.
Keywords:
Authors
F. Rahmani
Department of Mechanical Engineering, Kar higher Education Institute, Qazvin, Iran
S. M. H. Seyedkashi
Department of Mechanical Engineering, University of Birjand, Birjand, Iran
S. J. Hashemi
Department of Mechanical Engineering, Faculty of Enghelab-e Eslami, Tehran Branch, Technical and Vocational University (TVU), Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :