A New Correlation Based on Multi-Gene Genetic Programming for Predicting the Sweet Natural Gas Compressibility Factor

Publish Year: 1394
نوع سند: مقاله ژورنالی
زبان: English
View: 131

This Paper With 10 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_GPJU-3-1_006

تاریخ نمایه سازی: 21 دی 1400

Abstract:

Gas compressibility factor (z-factor) is an important parameter widely applied in petroleum and chemical engineering. Experimental measurements, equations of state (EOSs) and empirical correlations are the most common sources in z-factor calculations. However, these methods have serious limitations such as being time-consuming as well as those from a computational point of view, like instability, convergence and accuracy. Accurate and fast estimation of this parameter is of interest and a challenging factor in the numerous calculations related to oil and gas processing plants. In this study, a meta-learning algorithm named multi-gene genetic algorithm (MGGP) was applied to predict the sweet gas compressibility factor. To assess the effectiveness of the MGGP model statistical criteria, is applied. The validity of this proposed model was compared with the experimental data. The results showed that the model has successfully predicted the sweet natural gas z-factor, especially at the midrange of operating conditions. However, the MGGP model seems to be inefficient in boundary values of Tpr (i.e. around ۱ and ۲). In addition, the MGGP model is compared with other z-factor correlations and it is revealed that the implementation of MGGP model lead to a more accurate and reliable estimation of the natural gas compressibility factor.

Authors

Hossein Kaydani

Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran

Ali Mohebbi

Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran

Mohammad Hassan Saffaripour

Department of Mechanical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman, Iran