Investigation of phase and microstructural features of Ti-۶Al-۴V extra-low interstitial alloy after thermomechanical process
Publish place: 10th International Conference on Materials Science & Metallurgical Engineering (iMat2021)
Publish Year: 1400
نوع سند: مقاله کنفرانسی
زبان: English
View: 145
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES15_108
تاریخ نمایه سازی: 13 بهمن 1400
Abstract:
This work is dedicated to discuss the effect of the thermomechanical process on the phase changes, microstructural features and microhardness of a Ti–۶Al–۴V extra-low interstitial (ELI) alloy, which is commonly used as load bearing biomaterial. Microstructure and phase characterization were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The microstructural and lattice strain during thermomechanical process were characterized thoroughly by different methods of Williamson-Hall and Rietveld method on X-ray Diffraction. Results showed that the microstructure changed significantly due to the forging process and the microhardness was reached the ۳۷۲.۸۳ Hv. Also, the results confirmed considerable regulations in lattice and microstructural features which were directly influenced by the thermomechanical process.
Keywords:
Authors
Mehrdad Shahbaz
Assistant Professor, Materials Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran.
Majid Kavanlouei
Assistant Professor, Materials Engineering Department, Faculty of Engineering, Urmia University, Urmia, Iran.