Flow Characteristics of a Mixed Compression Hypersonic Intake
Publish place: Journal of Applied Fluid Mechanics، Vol: 15، Issue: 3
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 107
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-15-3_001
تاریخ نمایه سازی: 18 فروردین 1401
Abstract:
The flow field in a two-dimensional hypersonic mixed-compression inlet in a freestream Mach numbers of M∞ =۲.۰, ۳.۰, and ۵.۰ are numerically solved to understand the effect of throat area variation. The exit area ratio variation is simulated by placing a plug insert at different axial locations at the exit of the model. The flow field is achieved computationally by solving the Reynolds Averaged Navier-Stokes equations in a finite volume framework. For each flow condition, the variation in shock structure is analyzed and the variation of the oblique shock wave angle with the mass flow rate is calculated theoretically and compared with the present CFD analysis. The variation in oblique shock angle is calculated in terms of the mass flow rate by considering the capture area and spillage flow through the inlet. The theoretical results suggest that the method can predict the inlet operating conditions at different freestream Mach numbers and area ratios. This method can quantify the reduction in mass flow rate due to the throttling effect by analyzing the flow field shock pattern. The effects of various important performance parameters such as free stream Mach number, total pressure recovery, and mass flow ratio were then numerically investigated. As the Mach number is increased, the total pressure recovery is reduced, but the maximum value of the mass flow rate is increased. The analysis is also focused on the effect of throat area variation on performance parameters at each Mach number. The characteristic curve of the inlet is then obtained for each free stream Mach number.
Keywords:
Authors
J. K. James
Department of Mechanical Engineering, Andong National University, Andong,۳۶۷۲۹, Republic of Korea
H. D. Kim
Department of Mechanical Engineering, Andong National University, Andong,۳۶۷۲۹, Republic of Korea
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :