An Experimental and CFD Investigation on Effect of Initial Bubble Diameter on its Rise Velocity Profile in A Laboratory-Scale Flotation Column Cell
Publish place: Journal of Mining and Environment، Vol: 12، Issue: 4
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 167
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-12-4_014
تاریخ نمایه سازی: 29 فروردین 1401
Abstract:
The bubble diameter effect on the bubble rise velocity profile in a flotation column is studied by the two-phase computational fluid dynamics (CFD) method. The simulations are done in the ANSYS® Fluent® software using a two-phase volume of fluid model. The computational domain is a square cross-section column with a ۱۰ cm width and a ۱۰۰ cm height, in which air is interred as a single bubble from the lower part of the column by an internal sparger. An experimental test is also performed, the hydrodynamics parameters are recorded, and the simulated results are validated using the values obtained for the bubble rise velocity. The simulation results obtained indicate that CFD can predict the bubble rise velocity profile and its value in the flotation column with less than ۵% difference in comparison with the experimental results. Then the simulations are repeated for the other initial bubble diameter in the bubbly flow regime in order to study the bubble diameter effect on the rise velocity profile. The results obtained demonstrate that the larger bubbles reach the maximum velocity faster than the small ones, while the value of maximum velocity decreases by an increase in the bubble diameter. These results can be used to improve the flotation efficiency.
Keywords:
Authors
N. Khorasanizadeh
Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
M. Karamoozian
Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
H. Nouri-Bidgoli
Department of Mechanical Engineering, Islamic Azad University of Kashan, Kashan, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :