Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 189
This Paper With 22 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-53-1_001
تاریخ نمایه سازی: 11 اردیبهشت 1401
Abstract:
In this study, dynamic analysis of functionally graded carbon nanotube reinforced composite (FGCNT) beam resting on viscoelastic foundation is investigated. Four different types of carbon nanotubes (CNTs) distribution including uniform (UD-CNT), and three types of functionally graded distribution of CNTs through the thickness of beam are considered. The Kelvin–Voigt viscoelastic model and higher-order shear deformation beam theory (HOBT) have been used. The rule of mixture is used to describe the effective material properties of the nanocomposite beams. The equations of motion are derived by using Lagrange’s equations, and solved by using finite element and Newmark methods. The effects of volume fraction and distribution of CNTs, stiffness and damping of viscoelastic foundation, slenderness ratio and different boundary conditions on transverse displacement and stresses of beam are investigated. The results show that by using viscoelastic foundation the amount of normal and shear stress have decreased considerably, and by increasing the stiffness coefficient of foundation, transverse displacement of beam reduces and the frequency of vibration increases as well, meanwhile by increasing the damping coefficient of foundation, amplitude of vibration decreases considerably. The model is verified and compared with previously published works and it shows good agreement.
Keywords:
Dynamic analysis , Third -order beam theory , Carbon nanotube reinforced composite , FEM , Viscoelastic foundation
Authors
Faraz Kiarasi
Department of Mechanical Engineering, University of Eyvanekey, Eyvanekey, Semnan, Iran
Ali Asadi
Department of Mechanical Engineering, Islamic Azad University, North Tehran Branch, Tehran, Iran
Masoud Babaei
Department of Mechanical Engineering, University of Eyvanekey, Eyvanekey, Semnan, Iran
Kamran Asemi
Department of Mechanical Engineering, Islamic Azad University, North Tehran Branch, Tehran, Iran
Mohammad Hosseini
Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :