Application of the Godunov-Type Corrective Smoothed Particle Method to Impulsive Load Studies
Publish place: Journal of Applied Fluid Mechanics، Vol: 15، Issue: 6
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 144
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-15-6_020
تاریخ نمایه سازی: 2 مهر 1401
Abstract:
The smoothed particle hydrodynamics (SPH) method is based on the kernel particle approximation, which is sensitive to the uniformity of the SPH particle distribution in the computational domain; that is, all SPH particles must be distributed evenly in the computational domain. These factors significantly influence the practical application of the SPH method. Meanwhile, calculating the sum near the boundaries of the computational domain may cause boundary defect problems since there are insufficient particles in the support domain, thus often resulting in relatively high errors in numerical simulation results near boundaries. To address these problems, the kernel particle approximation discrete process was corrected based on the traditional SPH method, and the corrected SPH method, the Godunov-type corrective smoothed particle method (CSPM), was formulated by introducing Riemann decomposition. In this study, the traditional SPH method and Godunov-type CSPM method were applied in a comparative study of discontinuous function problems, ۱D shock tubes and ۱D detonation waves. According to the analysis results, the Godunov-type CSPM method can not only effectively improve the calculation accuracy and compatibility of the traditional SPH method in discontinuous shock wave problems but also increase the accuracy of the traditional SPH method in capturing strong discontinuities.
Keywords:
Meshfree method , SPH method , Godunov-type corrective smoothed particle method (GSPM) , ۱D shock tube , ۱D detonation wave
Authors
M. Zhang
Key Laboratory of Microgravity (National Microgravity Laboratory), Institute of Mechanics, Chinese Academy of Sciences, Beijing ۱۰۰۱۹۰, P.R. China
J. M. Zhang
School of Architectural Engineering, Kunming University of Science and Technology, Kunming ۶۵۰۵۰۰, P.R. China
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :