Green Synthesis of Silica Extracted from Rice Husk Ash
Publish place: Advanced Ceramics Progress، Vol: 8، Issue: 4
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 168
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-8-4_002
تاریخ نمایه سازی: 11 اردیبهشت 1402
Abstract:
There has been a significant rise in the scientific, technological, ecological, economic, and social popularity of applications of by-products or waste materials in various industries including the agricultural sector. A by-product of rice۴ milling is Rice Husk (RH), which, when burned, produces Rice Husk Ash (RHA). RHA is considered an economically viable raw material used for developing silica-based products since it contains a significant amount of amorphous silica (between ۸۵ and ۹۵ percent). The current research aims to create a green process for producing silica powders from RHA, an inexpensive source rich in biocompatible silica. High-purity silica was successfully generated from RHA through alkaline extraction using the reflux technique and subsequent acidification. For this purpose, RH was burned in an electric furnace for five hours to create RHA at ۷۰۰ °C. The obtained ash was washed with hydrochloric acid to eliminate the metallic impurities. The sodium silicate solution was then obtained by refluxing the acid-washed RHA in a NaOH solution. The final step was to precipitate silica from sodium silicate solution by adding hydrochloric acid to decrease the pH by ۴. Characterizations made in general are Thermo-Gravimetric Analysis (TGA), X-Ray Fluorescence (XRF) for identifying the mineral contents of RHA, Fourier-Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Simple, efficient, environmentally-friendly, and ideal for mass production are all attributes of the synthetic process.
Keywords:
Authors
Nazli Aharipour
MSc, Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Tehran, Iran
Ali Nemati
Professor, Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Tehran, Iran
Adrine Malek Khachatourian
Assistant Professor, Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :