EFFECT OF CONTROLLED QUENCHING ON THE AGING OF ۲۰۲۴ ALUMINUM ALLOY CONTAINING BORON

The presence of alloying elements, sometimes in a very small amount, affects mechanical properties one of these elements is Boron. In Aluminum industries, Boron master alloy is widely used as a grain refiner In this research, the production process of Aluminum –Boron master alloy was studied at first then, it was concurrently added to ۲۰۲۴ Aluminum alloy. After rolling and homogenizing the resulting alloy, the optimal temperature and time of aging were determined during the precipitation hardening heat treatment by controlled quenching (T۶C). Then, in order to find the effect of controlled quenching, different cycles of heat treatment including precipitation heat treatment by controlled quenching (T۶C) and conventional quenching (T۶) were applied on the alloy at the aging temperature of ۱۱۰°C. Mechanical properties of the resulting alloy were evaluated after aging at optimum temperature of ۱۱۰°C by performing mechanical tests including hardness and tensile tests. The results of hardness test showed that applying the controlled quenching instead of conventional quenching in precipitation heat treatment caused reduction in the time of reaching the maximum hardness and also increase in hardness rate due to the generated thermo-elastic stresses rather than hydrostatic stresses and increased atomic diffusion coefficient as well. Tensile test results demonstrated that, due to the presence of boride particles in the microstructure of the present alloy, the ultimate tensile strength in the specimens containing Boron additive increased by ۳.۴۰% in comparison with the specimens without such an additive and elongation (percentage of relative length increase) which approximately increased by ۳۸.۸۰% due to the role of Boron in the increase of alloy ductility

Keywords:

Aluminum–Boron master alloy , ۲۰۲۴ Aluminum alloy , Precipitation hardening heat treatment , Controlled