FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
Publish Year: 1383
نوع سند: مقاله ژورنالی
زبان: English
View: 34
نسخه کامل این Paper ارائه نشده است و در دسترس نمی باشد
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-1-2_004
تاریخ نمایه سازی: 26 مرداد 1402
Abstract:
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be controlled by the combined influences of heat and mass transfer. The flow rate increased with increasing pattern thickness.
Keywords:
Authors