Stress Relief and Material Properties Improvement Through Vibration VS. Common Thermal Method
Publish place: Journal of Solid Mechanics، Vol: 4، Issue: 2
Publish Year: 1391
نوع سند: مقاله ژورنالی
زبان: English
View: 109
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-4-2_005
تاریخ نمایه سازی: 28 مرداد 1402
Abstract:
The goal of this study is investigating reduction of residual stresses from welding carbon steel plates through vibrationstress reliefmethod vs. thermal method. In order to carry out the required experimental tests, carbon steel plates were welded together under specific conditions as samples. Some of the samples were vibration stress relieved, some were thermal stress relieved while the rest remained without any stress relief operation. Several destructive and non-destructive tests were performed on all the stress relieved and non-relieved specimens and the data obtained from these tests were compared in order to reach the optimum vibration effect on stress relieved welded joints. The results attained for vibration method indicated an acceptable amount of reduction of residual stresses in the joints. In addition, some improvements in mechanical properties achieved vibration stress relief method were used.
Keywords:
Authors
S Jafari Mehrabadi
Department of Mechanical Engineering, Islamic Azad University, Arak Branch
M Azizmoradi
Department of Mechanical Engineering, Islamic Azad University, Arak Branch
M.M Emami
Machin Sazi Arak Company
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :