A Numerical Study on Surface-piercing Propellers using Sliding Mesh Method via Openfoam Software
Publish place: Iranica Journal of Energy and Environment، Vol: 14، Issue: 4
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 106
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJEE-14-4_011
تاریخ نمایه سازی: 5 شهریور 1402
Abstract:
Surface-piercing propellers (SPP) are known as one of the most efficient propellers in marine sciences and maritime industries. In this study, different types of simulations were performed on an SPP in various rotational speeds in open water conditions, and a numerical study was also carried out on a particular type of such propellers. In fact the main purpose of this paper is comparing the simulation results with the experimental results from past in order to derive a trustable soultion for future works. For this purpose, the surface-piercing propeller was simulated by OpenFoam software (an open source software with high range of capabilities) in order to analyze the results. The performance curve was then plotted and compared with the ones from open water tests. In this case the turbulance model of K-Epsilon RNG was used which is capable of increasing Y+ to ۳۰۰ which is monitored at the end of the simulation with the maximum amount of ۳۱۵ and the average of ۸۰. Results showed that the curves followed the same pattern and trends in the numerical study, and the report pointed to similar findings. In conclusion, it was proved that the sliding mesh method was a proper way for simulating propellers, particularly SPPs. The curves for thrust and torque coefficients of the SPP were also compared with the literature and the efficiency curve was plotted.
Keywords:
Authors
A. Amini
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
N. M. Nouri
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
S. Niazi
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
A. Abedi
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :