The Effect of Slag Types and Melting Rate on Electro-Slag Remelting (ESR) Processing
Publish Year: 1384
نوع سند: مقاله ژورنالی
زبان: English
View: 84
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-2-1_006
تاریخ نمایه سازی: 5 شهریور 1402
Abstract:
In this research, the influence of chemical composition of slags and the melting rate on the impurity of commercial grade iron in ESR processing has been investigated.The chemical composition and microstructure studies were evaluated, using spectrophotometer,OMand EDX analyses attached to SEM.The results show that ESR process has successfully reduced the amount and size of inclusions. In some cases, sulfide inclusions were not observed and the size of other inclusions was reduced down to ۱۰ , whereas in primary electrodes the size of inclusion was up to ۱۰۰ . An increase in the slag basicity up to a critical point and a decrease in the melting rate caused better desulfurization ability of the slags. However, the increase in the time of process was governed by the melt temperature and fluidity.
Keywords:
Authors
K. Mehrabi
Materials and Energy Research Center, P.O.Box: ۱۴۱۵۵/۴۷۷۷, Tehran, Iran
M. Rahimipour
Materials and Energy Research Center, P.O.Box: ۱۴۱۵۵/۴۷۷۷, Tehran, Iran
A. Shokuhfar
Department of Materials Engineering, K. N. Toosi Univ. of Tech, Tehran, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :