Prediction of the Efficiency of Hydraulic Fracturing Based on Reservoir Parameters
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 70
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-36-12_005
تاریخ نمایه سازی: 22 مهر 1402
Abstract:
According to experts, the use of hydraulic fracturing can increase the oil and gas recovery factor by ۱۰-۱۵%. The Perm Territory belongs to the old oil-producing region of the Russian Federation. To date, more than ۶۰% of the remaining recoverable oil reserves of the fields of the Perm region are concentrated in carbonate deposits. Most of the fields are currently in the late stages of development. These fields, as a rule, are characterized by the presence of undrained zones with residual reserves and low well flow rates. Most of the remaining reserves of the fields are concentrated in low-permeability reservoirs with a high degree of heterogeneity and difficult fluid filtration. Unfortunately, the results obtained in practice do not always correspond to preliminary calculations and do not reach the planned oil production rates. In connection with the above, the problem arises of predicting the effectiveness of hydraulic fracturing operations using mathematical methods of analysis. The effectiveness of hydraulic fracturing is undoubtedly influenced by both geological and technological parameters. In this paper, for the carbonate Kashirsky (K) and Podolsky (Pd) productive deposits of one of the oil fields in the Perm region, using step-by-step regression analysis based on geological and technological parameters, a forecast of the initial oil production rate after hydraulic fracturing was made. There was good agreement between model and experimental results obtained.
Keywords:
Authors
А. Dieng
Department of Oil and Gas Technologies, Perm National Research Polytechnic University (PNRPU), Russia
G. P. Khiznyk
Department of Oil and Gas Technologies, Perm National Research Polytechnic University (PNRPU), Russia
V. V. Poplygin
Department of Oil and Gas Technologies, Perm National Research Polytechnic University (PNRPU), Russia
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :