Numerical investigation of heat transfer and flow characteristics of a special geometry of plate fin.
Publish place: 7th International Conference on Technology Development in Mechanical and Aerospace Engineering
Publish Year: 1402
نوع سند: مقاله کنفرانسی
زبان: English
View: 84
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
METEC07_018
تاریخ نمایه سازی: 25 آذر 1402
Abstract:
This simulation is a numerical study based on the finite volume method. Heherin, a simple flat plate is investigated by considering heat transfer and fluid flow characteristics. Then four models of that includingribs with different angles of ۲۵, ۳۵, ۴۵, and ۵۵ degrees are studied. The objective of this thesis is to decidewhich case can be better from a simple flat plate. The simulation is incompressible and ۲ dimensions. The achieved results show that The local Nusselt number increases as Re numbers. There is a drastic increase in Nusselt number due to the presence of the rib. The rib induces a blocking region in the front and a vacuum region at the back which causes more heat transfer in the region. The Nusselt number values are higher for high Reynolds numbers before the rib. However, there is a slight variation in the values behind the rib. Also, it can be observed that the higher Reynolds number creates a thicker boundary layer causing a lower heat transfer zone. As the rib angle increases, the Nusselt number increases except in case D. As the rib angle increases, the friction factor increases. According to the productivity factor, for Re numbers less than ۱۰۵۰۰۰, Case C is better and for Re numbers more than ۱۰۵۰۰۰, Case B can be better.
Keywords:
Authors
Ali Malik Wannas
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran
Seyed Mehdi Pesteei
Department of Mechanical Engineering, Faculty of Engineering, Urmia University, Urmia, Iran