An Investigation to Reduce the Cutting Force in CNC Slot Milling Operation by Forecasting Optimum Process Parameters and Develop Precise Mathematical Model for It
Publish Year: 1403
نوع سند: مقاله ژورنالی
زبان: English
View: 63
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-37-3_013
تاریخ نمایه سازی: 21 بهمن 1402
Abstract:
Industries frequently encounter several difficulties during milling operations, especially with cutting forces. Slot milling involves the machining of slots in materials using a milling cutter, and the challenges related to cutting forces can significantly impact the efficiency and quality of the milling process. CNC milling is widely used for machining of different types of materials in the manufacturing industry. Therefore, it is required to study process parameters and its behavior on materials which is not only to enhance the process but also make an effective and efficient path in metal cutting process. This research includes the effect of three input parameters i.e. feed rate, cutting speed and depth of cut on cutting force for Mild Steel. An empirical study gives the significant behavior of process or input parameter on machining properties. A mathematical study viz. ANOVA (Analysis of variance) gives the correlation in-between input or process parameters and machining or output properties for Mild Steel. It is also developed an equation for cutting force using a Regression model for the prediction of feed, speed and depth of cut. Values obtained from the mathematical models and Regression model was found to be very close to the data obtained from the experimental studies. The lowest cutting forces were obtained at high cutting speed and low feed rate and depth of cut.
Keywords:
Authors
L. S. Patel
Mechanical Engineering Department, Government Engineering College Sura, GujaratTechnological University, Gujarat, India
V. P. Parekh
Mechanical Engineering Department, SVIT-Vasad, Gujarat Technological University, Gujarat, India
A. S. Vagh
Liquid Terminal Department, Adani Hazira Port Limited, Surat, Gujarat, India
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :