Production of low permeability concrete

Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 64

This Paper With 13 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JCESE-2-1_001

تاریخ نمایه سازی: 5 اسفند 1402

Abstract:

This research aims to study the feasibility of producing low permeability concrete using bentonite. A comparison between concrete mixes with bentonite and the mixes with addicrate as a chemical addition for reducing the permeability was investigated. The impact resistance of this type of concrete was investigated. Two types of coarse aggregate (dolomite and gravel) were used. Bentonite with percent ۰, ۱, ۲, ۳, ۴, ۵, ۱۰, ۱۵ and ۲۰ % as a replacement of cement weight was used. Addicrete DM۲ with percent ۰, ۰.۲۵, ۰.۵, ۱ and ۲ % of cement weight was used. The mechanical properties of the mixes (compressive, tensile and flexural strength) and the impact test were evaluated. Also, the permeability coefficient for the different mixes was calculated. The results clear that; ۵ percent of bentonite was the optimum value to produce low permeability concrete. Also, the performance of the concrete was improved due to the use of bentonite. Out of this research, this type of concrete can be used in the marine structure which exposed to impact loads like dams and wears.This research aims to study the feasibility of producing low permeability concrete using bentonite. A comparison between concrete mixes with bentonite and the mixes with addicrate as a chemical addition for reducing the permeability was investigated. The impact resistance of this type of concrete was investigated. Two types of coarse aggregate (dolomite and gravel) were used. Bentonite with percent ۰, ۱, ۲, ۳, ۴, ۵, ۱۰, ۱۵ and ۲۰ % as a replacement of cement weight was used. Addicrete DM۲ with percent ۰, ۰.۲۵, ۰.۵, ۱ and ۲ % of cement weight was used. The mechanical properties of the mixes (compressive, tensile and flexural strength) and the impact test were evaluated. Also, the permeability coefficient for the different mixes was calculated. The results clear that; ۵ percent of bentonite was the optimum value to produce low permeability concrete. Also, the performance of the concrete was improved due to the use of bentonite. Out of this research, this type of concrete can be used in the marine structure which exposed to impact loads like dams and wears.

Authors

Mounir M.Kamal

Civil Engineering Department, Faculty of Engineering, Menoufia University, Egypt.

Zeinab A.Etman

Civil Engineering Department, Faculty of Engineering, Menoufia University, Egypt.

Mohamed R.Afify

Civil Engineering Department, Faculty of Engineering, Menoufia University, Egypt.

Ayman M.Elshaboury

Civil Engineering, Postgraduate Fellow, Faculty of Engineering, Menoufia University, Egypt.