Optimal Aspect-Ratio for Various Types of Braced Domes under Gravity Loads
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 50
This Paper With 7 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCESE-2-3_001
تاریخ نمایه سازی: 5 اسفند 1402
Abstract:
Latticed structures are one of best structural systems used for roofing. Lightness, rigidity, strength, shape flexibility, speed of construction, and economy were the main reasons behind the use of such systems in the last five decades. Braced-domes were one of oldest types of latticed structures and were used to cover many structures all around the world.In this paper, two main geometrical parameters of domes were studied; topology of the dome and aspect-ratio. Four different types of domes were studied using five different aspect-ratios for each type. SAP۲۰۰۰ was used to analysis a total of ۲۰ models. Models were mutually rigidly-connected while pin-supported at bottom ring and subjected to total gravity loads of ۱۲۰ kg/m۲.It was concluded from that Ribbed-dome had the minimum weight, but it had the lowest structural performance. On the other hand, Schwedler-dome had the maximum weight with the best structural performance. The optimal value of dome aspect-ratio (H/D) for all types was ۰.۲۵ as it resulted in maximum linear-buckling load with minimum displacements and internal forces but with slight increase in total dome-weight.Latticed structures are one of best structural systems used for roofing. Lightness, rigidity, strength, shape flexibility, speed of construction, and economy were the main reasons behind the use of such systems in the last five decades. Braced-domes were one of oldest types of latticed structures and were used to cover many structures all around the world.In this paper, two main geometrical parameters of domes were studied; topology of the dome and aspect-ratio. Four different types of domes were studied using five different aspect-ratios for each type. SAP۲۰۰۰ was used to analysis a total of ۲۰ models. Models were mutually rigidly-connected while pin-supported at bottom ring and subjected to total gravity loads of ۱۲۰ kg/m۲.It was concluded from that Ribbed-dome had the minimum weight, but it had the lowest structural performance. On the other hand, Schwedler-dome had the maximum weight with the best structural performance. The optimal value of dome aspect-ratio (H/D) for all types was ۰.۲۵ as it resulted in maximum linear-buckling load with minimum displacements and internal forces but with slight increase in total dome-weight.
Keywords:
Authors
Ghazi Abu-Farsakh
Professor of Structural Engineering, Civil Engineering Department, Jordan University of Science and Technology, Jordan
Nasser Al-Huthaifi
Graduate student at Civil Engineering Department, Jordan University of Science and Technology, Jordan