Effect of Pumice Stone and Sugar Molasses on the Behavior of Reinforced Concrete One-Way Ribbed Slabs
Publish place: Civil Engineering Journal، Vol: 8، Issue: 2
Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: English
View: 77
This Paper With 14 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CEJ-8-2_011
تاریخ نمایه سازی: 1 اردیبهشت 1403
Abstract:
The world is currently heading towards sustainability by reducing the amount of concrete, thus reducing the total unit weight. Moreover, design construction requires materials with a higher strength-to-weight ratio. Ribbed slabs and lightweight concrete (LWC) are considered two leading sustainability facilities. This research developed an experimental study to evaluate the effects of concrete type, steel reinforcement ratio, the geometry of ribs, voiding ratio, and slab type on the structural behavior of one-way ribbed slabs. Eight of the one-way slabs were constructed using pumice stone and by-product material sugar molasses (SM), and one slab was constructed using gravel and SM. These slabs were tested under a static two-point load and simply supported until failure. The results showed that using SM with pumice stone instead of gravel led to high strength-lightweight concrete (HSLWC), with a cylinder compressive strength of ۴۲.۲ MPa and a density of ۱۹۴۳ kg/m۳, which meets the requirements of HSLWC codes. Using HSLWC instead of high-strength normal-weight concrete (HSNWC) decreased the thermal conductivity by ۴۳.۵۵% and the unit weight by ۱۹.۳۱%. Moreover, the ultimate strength of the HSLWC one-way ribbed slab decreased by ۱۷.۷۰%. Overcoming this strength reduction necessitated increasing the steel reinforcement ratio of the ribs from ۰.۲۸ to ۰.۴۴% in the HSLWC ribbed slab. Changing the number of ribs at the same amount of HSLWC showed a minor effect on the strength capacity of slabs but showed an economic benefit. However, increasing the rib width to reduce the voiding ratio from ۴۴ to ۴۰% resulted in a greater improvement in structural efficiency (SE) of one-way ribbed slab than reducing it from ۴۴ to ۳۳%. Consequently, the optimum rib width was ۱۲۰ mm. Moreover, using a ribbed slab instead of a solid slab of HSLWC at the same amount of concrete increased the ultimate strength by ۱۳۰.۳۷%, decreased deflection by ۳.۹۹%, and improved SE by ۱۲۶.۴۶%. Furthermore, experimental results of ultimate load were compared with the ACI ۳۱۸-۱۹ code design equation. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۲-۰۸-۰۲-۰۱۱ Full Text: PDF
Keywords:
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :