Effect of Openings on the Torsional Behavior of SCC Box Beams Under Monotonic and Repeated Loading

Repeated Torsional loading occurs in many concrete structures, such as offshore structures, freeways, multistory parking garages, and other structures; however, repeated torsional loading is still poorly understood. This study aims to investigate the effect of openings on the ultimate and cracking torques, angle of twist, and modes of failure of self-compacted R.C. box beams under monotonic and repeated loading. Two groups of eight half-scale box beams with different numbers of circular openings in the web with a diameter of about ۳۰% of the hollow box dimension were investigated. The first group (I) included four beams: one was the control box beam without openings, whereas the rest of the beams were hollow with one, two, or three openings in the web tested under monotonic loading. The second group (II) consisted of the same details as the first one tested under repeated loading. The range of the repeated loading was about ۳۰% and ۶۰% of the ultimate load of the monotonic tests. The study showed that the cracking and ultimate torques and the angle of twist of the tested beams were significantly reduced due to openings in the web. Results revealed a more pronounced effect for monotonic loading, with a maximum reduction of ۲۰% and ۲۶.۸% in cracking and ultimate torsional strength, respectively, compared to monotonic loading. Moreover, results revealed that repeated loading causes inelastic deformations in proportion to the number of loading cycles. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۳-۰۹-۰۹-۰۱۵ Full Text: PDF

Keywords:

Torsion , Repeated Loading , Box Beams , Web Opening , Self-Compacted Concrete.