Rotor position Detection by Employing Pulse Injection Technique on switch Capacitor in Switched Reluctance Motor

This paper presents a new and novel method which is designed to detect the rotor position at standstill and also low speeds in switched reluctance motor. In this method a small capacitor is connected in series with the motor windings. The supply voltage in conjunction with the drive transistor produces short pulses for this series connection. The phase inductance varies with the rotor position, therefore the rise time of the voltage produced on the capacitor changes. Now the capacitor voltages are compared with a pre-set voltage value and the rotor position is detected at standstill mode. It then continues to sense the rotor position while the motor running by applying the same procedure but only to the un-energized phases winding. The results obtained demonstrate the feasibility and practicability of the method.

Rotor position Detection by Employing Pulse Injection Technique on switch Capacitor in Switched Reluctance Motor Keywords:

Switch Reluctance motor , Sensorless operation of SRM , Indirect rotor , position sensing in SRM