Flow Field Analysis and Structural Optimization of a Rotating Wind Collection Device
Publish place: Iranica Journal of Energy and Environment، Vol: 15، Issue: 4
Publish Year: 1403
نوع سند: مقاله ژورنالی
زبان: English
View: 6
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJEE-15-4_012
تاریخ نمایه سازی: 31 تیر 1403
Abstract:
In this paper, a new type of wind collection device that can generate rotating wind for wind power generation has been designed to address the shortcomings of current wind power generation devices. This device can collect wind energy from different directions by changing the direction of the wind. Firstly, the simulation model for this wind collection device had been designed by the software SolidWorks. Secondly, the internal flow field of the model was modeled and simulated using Computational Fluid Dynamics, and the k-ω SST model was selected in Fluent for flow field analysis. The results showed that this device could generate an outlet wind speed of ۳.۸ m/s at a wind speed of ۴ m/s, which verified the wind collection effect of the device. Thirdly, the outlet wind speed was taken as the optimization objective, and orthogonal optimization design was carried out on the guide convex groove in the model, and the optimal design parameters of the guide convex groove were determined. The results showed that when the width of the diversion convex groove is ۴۷.۳۵mm and the height is ۱۰.۶۵mm, the outlet wind speed is the highest, about ۳.۸۹m/s. Finally, to verify the analysis results of numerical simulation, the experimental verification of the wind collection device was carried out through physical prototypes. The results indicated that the simulation results are consistent with the physical results The design of this device can provide theoretical support for the subsequent design of a full-direction wind collection device to cope with the complex wind direction conditions.
Keywords:
Authors
Y. Xu
School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, China
H. Jiang
School of Civil and Engineering Management, Guangzhou Maritime University, Guangzhou, China
K. Chen
School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, China
Z. Jiang
School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, China
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :